C2MT-01814BBC04BE0

Specification: Part Number 1207867 Ambient operating temperature: -20 °C ... +55 °C Switching current: 300 mA Test rate (internal test): 47 /s Power consumption: ≤ 3 A Storage temperature: -25 °C ... +70 °C External device monitoring (EDM): + Safe state in the event of a fault: At least one OSSD is in the OFF state. Type: Type 2 (IEC 61496) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Automatic beam coding: + Protection class: III (EN 61140) Restart interlock: + Display elements: LEDs PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Synchronization: Optical, without separate synchronization Restart interlock (delivery status): Deactivated Housing material: Aluminum alloy ALMGSI 0.5 Maximum demand rate: 28 /min (EN ISO 13849) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Cascaded: + Conductor cross-section: 0.34 mm² Permitted cable length: ≤ 20 m Housing cross-section (incl. system connection): 15 mm x 32 mm Ripple: ≤ 10 % Response time: ≤ 14 ms Cable length: 160 mm Air humidity: 15 % ... 95 %, non-condensing Safe SICK device communication via EFI/SDL: - Category: Category 2 (EN ISO 13849) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Connection type: Male connector M12, 5-pin Switching voltage LOW: 2 V DC Beam coding: + Protective field height: 180 mm Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Typical range: 0 m ... 8 m Configuration method: Hard wired Scanning range: 0 m ... 6 m Enclosure rating: IP 65 (EN 60529) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored External device monitoring (delivery status): Deactivated TM (mission time): 20 a (EN ISO 13849) Resolution: 14 mm Connection type extension connection: Female connector M12, 5-pin Weight: 75 g