C2MT-01814BBC03BE0

Specification: Part Number 1207794 Configuration method: Hard wired Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Category: Category 2 (EN ISO 13849) Switching voltage LOW: 2 V DC Cable length: 160 mm External device monitoring (EDM): + Scanning range: 0 m ... 6 m External device monitoring (delivery status): Deactivated Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Cascaded: - PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Permitted cable length: ≤ 20 m Display elements: LEDs Protection class: III (EN 61140) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Typical range: 0 m ... 8 m Connection type: Male connector M12, 5-pin Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Conductor cross-section: 0.34 mm² Type: Type 2 (IEC 61496) TM (mission time): 20 a (EN ISO 13849) Safe state in the event of a fault: At least one OSSD is in the OFF state. Synchronization: Optical, without separate synchronization Housing cross-section (incl. system connection): 15 mm x 32 mm Restart interlock: + Storage temperature: -25 °C ... +70 °C Power consumption: ≤ 3 A Safe SICK device communication via EFI/SDL: - Resolution: 14 mm Weight: 75 g Test rate (internal test): 58 /s Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Air humidity: 15 % ... 95 %, non-condensing Automatic beam coding: + Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Enclosure rating: IP 65 (EN 60529) Maximum demand rate: 34 /min (EN ISO 13849) Protective field height: 180 mm Switching current: 300 mA Beam coding: + Ripple: ≤ 10 % Response time: ≤ 14 ms Restart interlock (delivery status): Deactivated Housing material: Aluminum alloy ALMGSI 0.5 Ambient operating temperature: -20 °C ... +55 °C