C2MT-01224BBC03BE0

Specification: Part Number 1207822 Ripple: ≤ 10 % Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Air humidity: 15 % ... 95 %, non-condensing Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Housing cross-section (incl. system connection): 15 mm x 32 mm Enclosure rating: IP 65 (EN 60529) Maximum demand rate: 34 /min (EN ISO 13849) Resolution: 24 mm Weight: 50 g Protection class: III (EN 61140) Restart interlock (delivery status): Deactivated Safe SICK device communication via EFI/SDL: - Display elements: LEDs Connection type: Male connector M12, 5-pin Restart interlock: + Housing material: Aluminum alloy ALMGSI 0.5 Typical range: 0 m ... 8 m Synchronization: Optical, without separate synchronization PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Cascaded: - Cable length: 160 mm Beam coding: + Scanning range: 0 m ... 6 m Response time: ≤ 13 ms Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Category: Category 2 (EN ISO 13849) Permitted cable length: ≤ 20 m Storage temperature: -25 °C ... +70 °C Power consumption: ≤ 3 A Type: Type 2 (IEC 61496) Switching voltage LOW: 2 V DC External device monitoring (delivery status): Deactivated Safe state in the event of a fault: At least one OSSD is in the OFF state. Switching current: 300 mA Automatic beam coding: + External device monitoring (EDM): + Configuration method: Hard wired Ambient operating temperature: -20 °C ... +55 °C Shock resistance: 10 g, 16 ms (EN 60068-2-27) Conductor cross-section: 0.34 mm² Test rate (internal test): 58 /s Protective field height: 120 mm TM (mission time): 20 a (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC)