C2MT-01214BBC03BE0

Specification: Part Number 1207793 External device monitoring (EDM): + Cascaded: - Restart interlock: + Category: Category 2 (EN ISO 13849) TM (mission time): 20 a (EN ISO 13849) Typical range: 0 m ... 8 m Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Protection class: III (EN 61140) Connection type: Male connector M12, 5-pin Ambient operating temperature: -20 °C ... +55 °C External device monitoring (delivery status): Deactivated Maximum demand rate: 34 /min (EN ISO 13849) Response time: ≤ 14 ms Resolution: 14 mm Switching voltage LOW: 2 V DC Weight: 50 g Shock resistance: 10 g, 16 ms (EN 60068-2-27) Conductor cross-section: 0.34 mm² Ripple: ≤ 10 % Restart interlock (delivery status): Deactivated Cable length: 160 mm Automatic beam coding: + Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Housing material: Aluminum alloy ALMGSI 0.5 Scanning range: 0 m ... 6 m Protective field height: 120 mm Synchronization: Optical, without separate synchronization Enclosure rating: IP 65 (EN 60529) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Power consumption: ≤ 3 A Switching current: 300 mA Type: Type 2 (IEC 61496) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Display elements: LEDs Permitted cable length: ≤ 20 m Safe state in the event of a fault: At least one OSSD is in the OFF state. Configuration method: Hard wired Beam coding: + Safe SICK device communication via EFI/SDL: - Test rate (internal test): 58 /s Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Housing cross-section (incl. system connection): 15 mm x 32 mm Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Storage temperature: -25 °C ... +70 °C Air humidity: 15 % ... 95 %, non-condensing