C2MT-01214BBC03BB0

Specification: Part Number 1207923 Permitted cable length: ≤ 20 m TM (mission time): 20 a (EN ISO 13849) Connection type: Male connector M12, 5-pin Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Type: Type 2 (IEC 61496) Restart interlock: + Configuration method: Hard wired Resolution: 14 mm External device monitoring (EDM): + Ambient operating temperature: -20 °C ... +55 °C Enclosure rating: IP 65 (EN 60529) External device monitoring (delivery status): Deactivated Safe state in the event of a fault: At least one OSSD is in the OFF state. Automatic beam coding: + Synchronization: Optical, without separate synchronization Cascaded: - Category: Category 2 (EN ISO 13849) Switching voltage LOW: 2 V DC Power consumption: ≤ 3 A Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Safe SICK device communication via EFI/SDL: - Protective field height: 120 mm Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Scanning range: 0 m ... 6 m Cable length: 160 mm Beam coding: + PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Protection class: III (EN 61140) Weight: 50 g Housing cross-section (incl. system connection): 15 mm x 32 mm Display elements: LEDs Response time: ≤ 14 ms Shock resistance: 10 g, 16 ms (EN 60068-2-27) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Maximum demand rate: 34 /min (EN ISO 13849) Housing material: Aluminum alloy ALMGSI 0.5 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Air humidity: 15 % ... 95 %, non-condensing Test rate (internal test): 58 /s Switching current: 300 mA Storage temperature: -25 °C ... +70 °C Conductor cross-section: 0.34 mm² Typical range: 0 m ... 8 m Ripple: ≤ 10 % Restart interlock (delivery status): Deactivated