C2MT-01214BBC04BE0

Specification: Part Number 1207866 Shock resistance: 10 g, 16 ms (EN 60068-2-27) Storage temperature: -25 °C ... +70 °C Power consumption: ≤ 3 A Connection type: Male connector M12, 5-pin Safe SICK device communication via EFI/SDL: - Housing material: Aluminum alloy ALMGSI 0.5 Resolution: 14 mm Test rate (internal test): 47 /s Ripple: ≤ 10 % Category: Category 2 (EN ISO 13849) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Cascaded: + Enclosure rating: IP 65 (EN 60529) Weight: 50 g Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Display elements: LEDs Configuration method: Hard wired Type: Type 2 (IEC 61496) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Ambient operating temperature: -20 °C ... +55 °C Conductor cross-section: 0.34 mm² Protective field height: 120 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Switching voltage LOW: 2 V DC Permitted cable length: ≤ 20 m Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Housing cross-section (incl. system connection): 15 mm x 32 mm Response time: ≤ 14 ms Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Connection type extension connection: Female connector M12, 5-pin Synchronization: Optical, without separate synchronization External device monitoring (EDM): + Restart interlock: + Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Air humidity: 15 % ... 95 %, non-condensing External device monitoring (delivery status): Deactivated Beam coding: + Switching current: 300 mA PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Maximum demand rate: 28 /min (EN ISO 13849) Scanning range: 0 m ... 6 m Cable length: 160 mm Protection class: III (EN 61140) Typical range: 0 m ... 8 m TM (mission time): 20 a (EN ISO 13849) Automatic beam coding: + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Restart interlock (delivery status): Deactivated