BTF13-P1BM2025

Specification: Part Number 1060997 Mounted mechanic: MRA-F130-120D1 Relative humidity / Condensation: 95 % (A3M60, condensation of the optical scanning not permitted), 98 % (ATM60 PROFIBUS, condensation of the optical scanning not permitted) Part number encoder: 1051018 Wire acceleration: 30 m/s² Working temperature range (mechanics): -30 °C ... +70 °C Housing material, wire draw mechanism: Aluminum (anodised), plastic Mass (measuring wire): 2.6 g/m Power consumption: 1.5 W (A3M60), 2 W (ATM60 PROFIBUS) Enclosure rating mechanic: IP 64 Encoder: Absolute encoders Part number mechanic: 6028628 Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A Supply voltage: 10 V ... 32 V Enclosure rating encoder: IP 67 Connection type: Connector 3 x M12, 5-pin, axial Spring return force: 10 N ... 20 N Working temperature range (encoder): -10 °C ... +70 °C, A3M60, -20 °C ... +70 °C, ATM60 PROFIBUS Electrical interface: PROFIBUS EMC: (according to EN 61000-6-2 and EN 61000-6-3) Mass (mechanics): 5 kg Operating speed: 4 m/s Life of wire draw mechanism: 1 million cycles MTTFd: mean time to dangerous failure: 150 a (ATM60 PROFIBUS), 60 a (A3M60) Actual length of cable extension: 20.2 m Address setting: 0 ... 127, DIP switch Measuring range: 0 m ... 20 m Mass (including encoder): 5.28 kg (A3M60), 5.59 kg (A3M60) Encoder profile: Encoder profile version 1.1 class 1 and class 2 (A3M60), Profil für Encoder (07hex) - Class 2 (ATM60 PROFIBUS) Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Bus termination: Via DIP switches Initialization time: Ca. 1 s, A3M60, Ca. 12 s, ATM60 PROFIBUS Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Measuring wire diameter: 0.81 mm Number of steps per revolution: 8,192 Repeatability: ≤ 2 mm Mounted encoder: A3M60, ATM60 PROFIBUS Linearity: ≤ ± 2 mm Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik Length of wire pulled out per revolution: 332.4 mm Hysteresis: ≤ 5 mm Protocol: PROFIBUS DP V0 (A3M60), Profil für Encoder (07hex) - Class 2 (ATM60 PROFIBUS) SET (electronic adjustment): Via PRESET push button or protocol Resolution (wire draw + encoder): 0.04 mm