C2MT-01824BBC03BE0

Specification: Part Number 1207823 TM (mission time): 20 a (EN ISO 13849) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Housing material: Aluminum alloy ALMGSI 0.5 PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Configuration method: Hard wired Test rate (internal test): 58 /s Cable length: 160 mm Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Housing cross-section (incl. system connection): 15 mm x 32 mm Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Restart interlock: + Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Display elements: LEDs Resolution: 24 mm Beam coding: + Safe state in the event of a fault: At least one OSSD is in the OFF state. Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Cascaded: - Shock resistance: 10 g, 16 ms (EN 60068-2-27) Protective field height: 180 mm Automatic beam coding: + Category: Category 2 (EN ISO 13849) Type: Type 2 (IEC 61496) Permitted cable length: ≤ 20 m Storage temperature: -25 °C ... +70 °C Typical range: 0 m ... 8 m Weight: 75 g Maximum demand rate: 34 /min (EN ISO 13849) Switching current: 300 mA Switching voltage LOW: 2 V DC Ambient operating temperature: -20 °C ... +55 °C External device monitoring (delivery status): Deactivated Response time: ≤ 13 ms Synchronization: Optical, without separate synchronization Power consumption: ≤ 3 A Ripple: ≤ 10 % External device monitoring (EDM): + Protection class: III (EN 61140) Scanning range: 0 m ... 6 m Safe SICK device communication via EFI/SDL: - Connection type: Male connector M12, 5-pin Restart interlock (delivery status): Deactivated Enclosure rating: IP 65 (EN 60529) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Conductor cross-section: 0.34 mm² Air humidity: 15 % ... 95 %, non-condensing