C2MT-02414BBC03DB0

Specification: Part Number 1207925 Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Ambient operating temperature: -20 °C ... +55 °C Shock resistance: 10 g, 16 ms (EN 60068-2-27) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Category: Category 2 (EN ISO 13849) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Safe SICK device communication via EFI/SDL: - Synchronization: Optical, without separate synchronization External device monitoring (EDM): + Cable length: 350 mm Maximum demand rate: 34 /min (EN ISO 13849) Typical range: 0 m ... 8 m Switching current: 300 mA Housing material: Aluminum alloy ALMGSI 0.5 Restart interlock (delivery status): Deactivated Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Connection type: Male connector M12, 5-pin Test rate (internal test): 58 /s Scanning range: 0 m ... 6 m Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Storage temperature: -25 °C ... +70 °C Automatic beam coding: + Conductor cross-section: 0.34 mm² TM (mission time): 20 a (EN ISO 13849) Housing cross-section (incl. system connection): 15 mm x 32 mm External device monitoring (delivery status): Deactivated Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Safe state in the event of a fault: At least one OSSD is in the OFF state. Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Cascaded: - Weight: 95 g Protection class: III (EN 61140) Power consumption: ≤ 3 A Air humidity: 15 % ... 95 %, non-condensing Restart interlock: + Protective field height: 240 mm Beam coding: + Switching voltage LOW: 2 V DC Display elements: LEDs Response time: ≤ 14 ms Resolution: 14 mm Ripple: ≤ 10 % Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Permitted cable length: ≤ 20 m Enclosure rating: IP 65 (EN 60529) Type: Type 2 (IEC 61496) Configuration method: Hard wired