C2MT-02424BBC03DE0

Specification: Part Number 1207824 Shock resistance: 10 g, 16 ms (EN 60068-2-27) Power consumption: ≤ 3 A Protection class: III (EN 61140) Scanning range: 0 m ... 6 m Weight: 95 g Category: Category 2 (EN ISO 13849) Air humidity: 15 % ... 95 %, non-condensing Ambient operating temperature: -20 °C ... +55 °C Typical range: 0 m ... 8 m Automatic beam coding: + Safe SICK device communication via EFI/SDL: - Permitted cable length: ≤ 20 m Display elements: LEDs Restart interlock: + Safe state in the event of a fault: At least one OSSD is in the OFF state. TM (mission time): 20 a (EN ISO 13849) Ripple: ≤ 10 % External device monitoring (delivery status): Deactivated Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Cascaded: - Switching voltage LOW: 2 V DC Housing material: Aluminum alloy ALMGSI 0.5 Synchronization: Optical, without separate synchronization Storage temperature: -25 °C ... +70 °C External device monitoring (EDM): + Enclosure rating: IP 65 (EN 60529) Housing cross-section (incl. system connection): 15 mm x 32 mm Protective field height: 240 mm Response time: ≤ 13 ms Connection type: Male connector M12, 5-pin Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Resolution: 24 mm Configuration method: Hard wired Switching current: 300 mA Maximum demand rate: 34 /min (EN ISO 13849) Type: Type 2 (IEC 61496) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Cable length: 350 mm Restart interlock (delivery status): Deactivated Test rate (internal test): 58 /s Beam coding: + PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Conductor cross-section: 0.34 mm²