C2MT-03014BBC03DB0

Specification: Part Number 1207926 Conductor cross-section: 0.34 mm² Safe SICK device communication via EFI/SDL: - Storage temperature: -25 °C ... +70 °C Type: Type 2 (IEC 61496) External device monitoring (EDM): + External device monitoring (delivery status): Deactivated Connection type: Male connector M12, 5-pin TM (mission time): 20 a (EN ISO 13849) Protective field height: 300 mm Configuration method: Hard wired Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Ambient operating temperature: -20 °C ... +55 °C Enclosure rating: IP 65 (EN 60529) Beam coding: + Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Permitted cable length: ≤ 20 m Ripple: ≤ 10 % Restart interlock: + PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Cable length: 350 mm Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Automatic beam coding: + Switching current: 300 mA Power consumption: ≤ 3 A Scanning range: 0 m ... 6 m Housing material: Aluminum alloy ALMGSI 0.5 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Resolution: 14 mm Maximum demand rate: 34 /min (EN ISO 13849) Cascaded: - Synchronization: Optical, without separate synchronization Safe state in the event of a fault: At least one OSSD is in the OFF state. Test rate (internal test): 58 /s Response time: ≤ 14 ms Display elements: LEDs Restart interlock (delivery status): Deactivated Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Air humidity: 15 % ... 95 %, non-condensing Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Weight: 115 g Typical range: 0 m ... 8 m Switching voltage LOW: 2 V DC Housing cross-section (incl. system connection): 15 mm x 32 mm Category: Category 2 (EN ISO 13849) Protection class: III (EN 61140)