C2MT-03014BBC04DE0

Specification: Part Number 1207869 Restart interlock: + Storage temperature: -25 °C ... +70 °C Safe state in the event of a fault: At least one OSSD is in the OFF state. Test rate (internal test): 47 /s Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Display elements: LEDs Switching current: 300 mA Ripple: ≤ 10 % External device monitoring (delivery status): Deactivated Conductor cross-section: 0.34 mm² Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! External device monitoring (EDM): + Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) TM (mission time): 20 a (EN ISO 13849) Connection type: Male connector M12, 5-pin Scanning range: 0 m ... 6 m Typical range: 0 m ... 8 m Connection type extension connection: Female connector M12, 5-pin Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Automatic beam coding: + Maximum demand rate: 28 /min (EN ISO 13849) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Enclosure rating: IP 65 (EN 60529) Switching voltage LOW: 2 V DC Ambient operating temperature: -20 °C ... +55 °C Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Air humidity: 15 % ... 95 %, non-condensing Resolution: 14 mm Housing cross-section (incl. system connection): 15 mm x 32 mm Category: Category 2 (EN ISO 13849) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Protection class: III (EN 61140) Protective field height: 300 mm PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Permitted cable length: ≤ 20 m Restart interlock (delivery status): Deactivated Housing material: Aluminum alloy ALMGSI 0.5 Beam coding: + Configuration method: Hard wired Power consumption: ≤ 3 A Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Synchronization: Optical, without separate synchronization Response time: ≤ 14 ms Cascaded: + Safe SICK device communication via EFI/SDL: - Type: Type 2 (IEC 61496) Cable length: 350 mm Weight: 115 g