C2MT-03034BBC03DE0

Specification: Part Number 1207850 Shock resistance: 10 g, 16 ms (EN 60068-2-27) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Switching current: 300 mA Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Typical range: 0 m ... 8 m Restart interlock: + Synchronization: Optical, without separate synchronization Maximum demand rate: 34 /min (EN ISO 13849) Connection type: Male connector M12, 5-pin Test rate (internal test): 58 /s Power consumption: ≤ 3 A Cascaded: - PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Air humidity: 15 % ... 95 %, non-condensing Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Housing material: Aluminum alloy ALMGSI 0.5 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Safe state in the event of a fault: At least one OSSD is in the OFF state. Switching voltage LOW: 2 V DC Permitted cable length: ≤ 20 m Protective field height: 300 mm Automatic beam coding: + Beam coding: + Protection class: III (EN 61140) Weight: 115 g Configuration method: Hard wired Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! External device monitoring (EDM): + Restart interlock (delivery status): Deactivated Category: Category 2 (EN ISO 13849) Ripple: ≤ 10 % Cable length: 350 mm Display elements: LEDs Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Ambient operating temperature: -20 °C ... +55 °C Storage temperature: -25 °C ... +70 °C Type: Type 2 (IEC 61496) Safe SICK device communication via EFI/SDL: - Housing cross-section (incl. system connection): 15 mm x 32 mm Conductor cross-section: 0.34 mm² External device monitoring (delivery status): Deactivated Enclosure rating: IP 65 (EN 60529) Scanning range: 0 m ... 6 m Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Resolution: 34 mm Response time: ≤ 13 ms TM (mission time): 20 a (EN ISO 13849)