C2MT-03614BBC03DB0

Specification: Part Number 1207927 Shock resistance: 10 g, 16 ms (EN 60068-2-27) Permitted cable length: ≤ 20 m Switching current: 300 mA Housing material: Aluminum alloy ALMGSI 0.5 Power consumption: ≤ 3 A TM (mission time): 20 a (EN ISO 13849) Weight: 135 g Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Configuration method: Hard wired Response time: ≤ 14 ms Display elements: LEDs Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Resolution: 14 mm Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Automatic beam coding: + Ripple: ≤ 10 % Safe SICK device communication via EFI/SDL: - Housing cross-section (incl. system connection): 15 mm x 32 mm Air humidity: 15 % ... 95 %, non-condensing Protective field height: 360 mm PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Scanning range: 0 m ... 6 m Conductor cross-section: 0.34 mm² Category: Category 2 (EN ISO 13849) Restart interlock (delivery status): Deactivated Cable length: 350 mm Connection type: Male connector M12, 5-pin Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Restart interlock: + Synchronization: Optical, without separate synchronization Storage temperature: -25 °C ... +70 °C Ambient operating temperature: -20 °C ... +55 °C External device monitoring (delivery status): Deactivated Beam coding: + Switching voltage LOW: 2 V DC Protection class: III (EN 61140) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Cascaded: - Enclosure rating: IP 65 (EN 60529) Maximum demand rate: 34 /min (EN ISO 13849) Safe state in the event of a fault: At least one OSSD is in the OFF state. Type: Type 2 (IEC 61496) Typical range: 0 m ... 8 m External device monitoring (EDM): + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Test rate (internal test): 58 /s Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS)