C2MT-03614BBC03DE0

Specification: Part Number 1207797 Air humidity: 15 % ... 95 %, non-condensing Ambient operating temperature: -20 °C ... +55 °C Configuration method: Hard wired Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Connection type: Male connector M12, 5-pin Permitted cable length: ≤ 20 m Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Protection class: III (EN 61140) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Cable length: 350 mm Resolution: 14 mm Conductor cross-section: 0.34 mm² Maximum demand rate: 34 /min (EN ISO 13849) Power consumption: ≤ 3 A Category: Category 2 (EN ISO 13849) Ripple: ≤ 10 % Switching current: 300 mA Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) TM (mission time): 20 a (EN ISO 13849) Test rate (internal test): 58 /s Scanning range: 0 m ... 6 m Automatic beam coding: + Typical range: 0 m ... 8 m Safe state in the event of a fault: At least one OSSD is in the OFF state. Type: Type 2 (IEC 61496) Housing material: Aluminum alloy ALMGSI 0.5 Cascaded: - Restart interlock (delivery status): Deactivated Switching voltage LOW: 2 V DC External device monitoring (EDM): + Response time: ≤ 14 ms Weight: 135 g Restart interlock: + Synchronization: Optical, without separate synchronization Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Safe SICK device communication via EFI/SDL: - Storage temperature: -25 °C ... +70 °C Protective field height: 360 mm External device monitoring (delivery status): Deactivated Housing cross-section (incl. system connection): 15 mm x 32 mm Beam coding: + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Display elements: LEDs Enclosure rating: IP 65 (EN 60529) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS)