C2MT-03624BBC03DE0

Specification: Part Number 1207832 Housing cross-section (incl. system connection): 15 mm x 32 mm Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Air humidity: 15 % ... 95 %, non-condensing Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Conductor cross-section: 0.34 mm² Typical range: 0 m ... 8 m Safe state in the event of a fault: At least one OSSD is in the OFF state. Ripple: ≤ 10 % Synchronization: Optical, without separate synchronization Shock resistance: 10 g, 16 ms (EN 60068-2-27) Category: Category 2 (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Automatic beam coding: + Safe SICK device communication via EFI/SDL: - Cascaded: - External device monitoring (EDM): + Maximum demand rate: 34 /min (EN ISO 13849) Housing material: Aluminum alloy ALMGSI 0.5 Protective field height: 360 mm Switching voltage LOW: 2 V DC Connection type: Male connector M12, 5-pin Scanning range: 0 m ... 6 m Switching current: 300 mA Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Ambient operating temperature: -20 °C ... +55 °C Resolution: 24 mm Power consumption: ≤ 3 A Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Display elements: LEDs Test rate (internal test): 58 /s Response time: ≤ 13 ms Configuration method: Hard wired External device monitoring (delivery status): Deactivated Weight: 135 g Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! TM (mission time): 20 a (EN ISO 13849) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Permitted cable length: ≤ 20 m Protection class: III (EN 61140) Beam coding: + Restart interlock: + Type: Type 2 (IEC 61496) Restart interlock (delivery status): Deactivated Cable length: 350 mm Enclosure rating: IP 65 (EN 60529) Storage temperature: -25 °C ... +70 °C