C2MT-03634BBC03DB0

Specification: Part Number 1207965 Safe state in the event of a fault: At least one OSSD is in the OFF state. Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Response time: ≤ 13 ms Housing cross-section (incl. system connection): 15 mm x 32 mm Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Resolution: 34 mm Category: Category 2 (EN ISO 13849) Automatic beam coding: + Air humidity: 15 % ... 95 %, non-condensing Ripple: ≤ 10 % PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Configuration method: Hard wired Connection type: Male connector M12, 5-pin External device monitoring (delivery status): Deactivated Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Cascaded: - Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Conductor cross-section: 0.34 mm² Ambient operating temperature: -20 °C ... +55 °C Restart interlock (delivery status): Deactivated TM (mission time): 20 a (EN ISO 13849) Type: Type 2 (IEC 61496) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Weight: 135 g Typical range: 0 m ... 8 m Maximum demand rate: 34 /min (EN ISO 13849) Test rate (internal test): 58 /s Switching voltage LOW: 2 V DC Cable length: 350 mm Display elements: LEDs Protective field height: 360 mm External device monitoring (EDM): + Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Protection class: III (EN 61140) Permitted cable length: ≤ 20 m Beam coding: + Scanning range: 0 m ... 6 m Enclosure rating: IP 65 (EN 60529) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Switching current: 300 mA Safe SICK device communication via EFI/SDL: - Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Housing material: Aluminum alloy ALMGSI 0.5 Restart interlock: + Storage temperature: -25 °C ... +70 °C Power consumption: ≤ 3 A Synchronization: Optical, without separate synchronization