C2MT-04214BBC03DB0

Specification: Part Number 1207928 External device monitoring (delivery status): Deactivated TM (mission time): 20 a (EN ISO 13849) Beam coding: + Switching current: 300 mA Weight: 155 g Category: Category 2 (EN ISO 13849) Safe state in the event of a fault: At least one OSSD is in the OFF state. Power consumption: ≤ 3 A Ambient operating temperature: -20 °C ... +55 °C Resolution: 14 mm Permitted cable length: ≤ 20 m Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Restart interlock: + Synchronization: Optical, without separate synchronization Housing material: Aluminum alloy ALMGSI 0.5 Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Configuration method: Hard wired Shock resistance: 10 g, 16 ms (EN 60068-2-27) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Switching voltage LOW: 2 V DC Air humidity: 15 % ... 95 %, non-condensing Protective field height: 420 mm Safe SICK device communication via EFI/SDL: - Test rate (internal test): 58 /s Automatic beam coding: + Typical range: 0 m ... 8 m Conductor cross-section: 0.34 mm² Housing cross-section (incl. system connection): 15 mm x 32 mm Protection class: III (EN 61140) Ripple: ≤ 10 % Storage temperature: -25 °C ... +70 °C Cascaded: - Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Cable length: 350 mm Scanning range: 0 m ... 6 m Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Maximum demand rate: 34 /min (EN ISO 13849) Enclosure rating: IP 65 (EN 60529) Connection type: Male connector M12, 5-pin Response time: ≤ 14 ms Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Type: Type 2 (IEC 61496) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Restart interlock (delivery status): Deactivated External device monitoring (EDM): + Display elements: LEDs