C2MT-04214BBC04DE0

Specification: Part Number 1207871 Safe state in the event of a fault: At least one OSSD is in the OFF state. Cable length: 350 mm Weight: 155 g Enclosure rating: IP 65 (EN 60529) Housing material: Aluminum alloy ALMGSI 0.5 Connection type: Male connector M12, 5-pin Protection class: III (EN 61140) TM (mission time): 20 a (EN ISO 13849) Power consumption: ≤ 3 A Resolution: 14 mm Display elements: LEDs Conductor cross-section: 0.34 mm² Storage temperature: -25 °C ... +70 °C Scanning range: 0 m ... 6 m Type: Type 2 (IEC 61496) Restart interlock (delivery status): Deactivated Configuration method: Hard wired Maximum demand rate: 28 /min (EN ISO 13849) Cascaded: + Test rate (internal test): 47 /s Automatic beam coding: + External device monitoring (EDM): + Typical range: 0 m ... 8 m Ripple: ≤ 10 % Ambient operating temperature: -20 °C ... +55 °C Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Switching current: 300 mA Safe SICK device communication via EFI/SDL: - Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Beam coding: + Response time: ≤ 14 ms Air humidity: 15 % ... 95 %, non-condensing Protective field height: 420 mm Restart interlock: + Shock resistance: 10 g, 16 ms (EN 60068-2-27) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Housing cross-section (incl. system connection): 15 mm x 32 mm Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) External device monitoring (delivery status): Deactivated Permitted cable length: ≤ 20 m Synchronization: Optical, without separate synchronization Connection type extension connection: Female connector M12, 5-pin Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Category: Category 2 (EN ISO 13849) Switching voltage LOW: 2 V DC