C2MT-04224BBC03DE0

Specification: Part Number 1207833 External device monitoring (EDM): + Configuration method: Hard wired Cable length: 350 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Type: Type 2 (IEC 61496) Safe SICK device communication via EFI/SDL: - External device monitoring (delivery status): Deactivated Connection type: Male connector M12, 5-pin Typical range: 0 m ... 8 m Ambient operating temperature: -20 °C ... +55 °C Shock resistance: 10 g, 16 ms (EN 60068-2-27) TM (mission time): 20 a (EN ISO 13849) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Housing material: Aluminum alloy ALMGSI 0.5 Switching current: 300 mA Maximum demand rate: 34 /min (EN ISO 13849) Test rate (internal test): 58 /s PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Weight: 155 g Protective field height: 420 mm Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Switching voltage LOW: 2 V DC Beam coding: + Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Protection class: III (EN 61140) Air humidity: 15 % ... 95 %, non-condensing Cascaded: - Category: Category 2 (EN ISO 13849) Permitted cable length: ≤ 20 m Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Storage temperature: -25 °C ... +70 °C Power consumption: ≤ 3 A Housing cross-section (incl. system connection): 15 mm x 32 mm Ripple: ≤ 10 % Restart interlock: + Enclosure rating: IP 65 (EN 60529) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Conductor cross-section: 0.34 mm² Automatic beam coding: + Display elements: LEDs Synchronization: Optical, without separate synchronization Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Scanning range: 0 m ... 6 m Restart interlock (delivery status): Deactivated Response time: ≤ 13 ms Resolution: 24 mm