C2MT-04234BBC03DE0

Specification: Part Number 1207852 TM (mission time): 20 a (EN ISO 13849) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Response time: ≤ 13 ms External device monitoring (delivery status): Deactivated Conductor cross-section: 0.34 mm² Protective field height: 420 mm Cascaded: - Safe SICK device communication via EFI/SDL: - Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Permitted cable length: ≤ 20 m Weight: 155 g Maximum demand rate: 34 /min (EN ISO 13849) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Beam coding: + Typical range: 0 m ... 8 m Enclosure rating: IP 65 (EN 60529) Synchronization: Optical, without separate synchronization Display elements: LEDs Cable length: 350 mm Type: Type 2 (IEC 61496) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Housing material: Aluminum alloy ALMGSI 0.5 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Scanning range: 0 m ... 6 m Switching voltage LOW: 2 V DC Storage temperature: -25 °C ... +70 °C Power consumption: ≤ 3 A Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Switching current: 300 mA Connection type: Male connector M12, 5-pin Air humidity: 15 % ... 95 %, non-condensing Protection class: III (EN 61140) Category: Category 2 (EN ISO 13849) Ripple: ≤ 10 % External device monitoring (EDM): + Safe state in the event of a fault: At least one OSSD is in the OFF state. Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Resolution: 34 mm Housing cross-section (incl. system connection): 15 mm x 32 mm Configuration method: Hard wired Restart interlock (delivery status): Deactivated Restart interlock: + Test rate (internal test): 58 /s Ambient operating temperature: -20 °C ... +55 °C Automatic beam coding: +