C2MT-04814BBC03DE0

Specification: Part Number 1207799 TM (mission time): 20 a (EN ISO 13849) Conductor cross-section: 0.34 mm² Ripple: ≤ 10 % PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Safe SICK device communication via EFI/SDL: - Protective field height: 480 mm Maximum demand rate: 34 /min (EN ISO 13849) Beam coding: + Protection class: III (EN 61140) External device monitoring (delivery status): Deactivated Storage temperature: -25 °C ... +70 °C Test rate (internal test): 58 /s Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Housing material: Aluminum alloy ALMGSI 0.5 Configuration method: Hard wired Cable length: 350 mm Power consumption: ≤ 3 A External device monitoring (EDM): + Cascaded: - Safe state in the event of a fault: At least one OSSD is in the OFF state. Synchronization: Optical, without separate synchronization Air humidity: 15 % ... 95 %, non-condensing Scanning range: 0 m ... 6 m Restart interlock (delivery status): Deactivated Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Ambient operating temperature: -20 °C ... +55 °C Type: Type 2 (IEC 61496) Housing cross-section (incl. system connection): 15 mm x 32 mm Switching current: 300 mA Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Typical range: 0 m ... 8 m Shock resistance: 10 g, 16 ms (EN 60068-2-27) Connection type: Male connector M12, 5-pin Category: Category 2 (EN ISO 13849) Resolution: 14 mm Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Display elements: LEDs Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Permitted cable length: ≤ 20 m Enclosure rating: IP 65 (EN 60529) Weight: 175 g Switching voltage LOW: 2 V DC Response time: ≤ 14 ms Automatic beam coding: + Restart interlock: +