C2MT-04814BBC04DE0

Specification: Part Number 1207872 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Weight: 175 g Ambient operating temperature: -20 °C ... +55 °C Safe SICK device communication via EFI/SDL: - Protective field height: 480 mm Cable length: 350 mm Beam coding: + Configuration method: Hard wired Storage temperature: -25 °C ... +70 °C External device monitoring (delivery status): Deactivated Typical range: 0 m ... 8 m Shock resistance: 10 g, 16 ms (EN 60068-2-27) Restart interlock (delivery status): Deactivated Automatic beam coding: + Power consumption: ≤ 3 A Test rate (internal test): 47 /s Scanning range: 0 m ... 6 m Maximum demand rate: 28 /min (EN ISO 13849) Switching voltage LOW: 2 V DC Resolution: 14 mm Type: Type 2 (IEC 61496) Ripple: ≤ 10 % Category: Category 2 (EN ISO 13849) Restart interlock: + External device monitoring (EDM): + Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Cascaded: + Conductor cross-section: 0.34 mm² Protection class: III (EN 61140) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Connection type extension connection: Female connector M12, 5-pin Housing cross-section (incl. system connection): 15 mm x 32 mm Enclosure rating: IP 65 (EN 60529) Display elements: LEDs Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Air humidity: 15 % ... 95 %, non-condensing Switching current: 300 mA Connection type: Male connector M12, 5-pin TM (mission time): 20 a (EN ISO 13849) Permitted cable length: ≤ 20 m Synchronization: Optical, without separate synchronization Safe state in the event of a fault: At least one OSSD is in the OFF state. Housing material: Aluminum alloy ALMGSI 0.5 Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Response time: ≤ 14 ms