C2MT-04234BBC03DB0

Specification: Part Number 1207966 Housing material: Aluminum alloy ALMGSI 0.5 Switching voltage LOW: 2 V DC Response time: ≤ 13 ms Restart interlock (delivery status): Deactivated Cable length: 350 mm Maximum demand rate: 34 /min (EN ISO 13849) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Power consumption: ≤ 3 A Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Weight: 155 g Air humidity: 15 % ... 95 %, non-condensing Protective field height: 420 mm TM (mission time): 20 a (EN ISO 13849) Protection class: III (EN 61140) Safe SICK device communication via EFI/SDL: - Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Safe state in the event of a fault: At least one OSSD is in the OFF state. Synchronization: Optical, without separate synchronization Resolution: 34 mm Scanning range: 0 m ... 6 m Switching current: 300 mA Permitted cable length: ≤ 20 m Ambient operating temperature: -20 °C ... +55 °C Automatic beam coding: + Cascaded: - Shock resistance: 10 g, 16 ms (EN 60068-2-27) External device monitoring (delivery status): Deactivated Enclosure rating: IP 65 (EN 60529) Restart interlock: + Connection type: Male connector M12, 5-pin Conductor cross-section: 0.34 mm² Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Category: Category 2 (EN ISO 13849) Display elements: LEDs Typical range: 0 m ... 8 m Beam coding: + Test rate (internal test): 58 /s Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Type: Type 2 (IEC 61496) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) External device monitoring (EDM): + Ripple: ≤ 10 % Housing cross-section (incl. system connection): 15 mm x 32 mm Storage temperature: -25 °C ... +70 °C Configuration method: Hard wired