C2MT-04214BBC03DE0

Specification: Part Number 1207798 Maximum demand rate: 34 /min (EN ISO 13849) Permitted cable length: ≤ 20 m Safe state in the event of a fault: At least one OSSD is in the OFF state. Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Protection class: III (EN 61140) Switching voltage LOW: 2 V DC Weight: 155 g Protective field height: 420 mm Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Switching current: 300 mA Enclosure rating: IP 65 (EN 60529) Resolution: 14 mm Synchronization: Optical, without separate synchronization Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Restart interlock (delivery status): Deactivated Scanning range: 0 m ... 6 m Ripple: ≤ 10 % Beam coding: + Safe SICK device communication via EFI/SDL: - Housing cross-section (incl. system connection): 15 mm x 32 mm Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Housing material: Aluminum alloy ALMGSI 0.5 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) TM (mission time): 20 a (EN ISO 13849) Typical range: 0 m ... 8 m PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Ambient operating temperature: -20 °C ... +55 °C Category: Category 2 (EN ISO 13849) Power consumption: ≤ 3 A Type: Type 2 (IEC 61496) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Restart interlock: + Shock resistance: 10 g, 16 ms (EN 60068-2-27) External device monitoring (delivery status): Deactivated External device monitoring (EDM): + Display elements: LEDs Response time: ≤ 14 ms Configuration method: Hard wired Test rate (internal test): 58 /s Automatic beam coding: + Connection type: Male connector M12, 5-pin Cascaded: - Conductor cross-section: 0.34 mm² Air humidity: 15 % ... 95 %, non-condensing Storage temperature: -25 °C ... +70 °C Cable length: 350 mm Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061)