C2MT-03024BBC04DE0

Specification: Part Number 1207888 Connection type extension connection: Female connector M12, 5-pin Cable length: 350 mm Synchronization: Optical, without separate synchronization Air humidity: 15 % ... 95 %, non-condensing Automatic beam coding: + Connection type: Male connector M12, 5-pin Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Maximum demand rate: 28 /min (EN ISO 13849) Safe SICK device communication via EFI/SDL: - Safe state in the event of a fault: At least one OSSD is in the OFF state. External device monitoring (EDM): + Protection class: III (EN 61140) Response time: ≤ 13 ms Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Protective field height: 300 mm Housing cross-section (incl. system connection): 15 mm x 32 mm Display elements: LEDs Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Storage temperature: -25 °C ... +70 °C Ripple: ≤ 10 % Power consumption: ≤ 3 A Shock resistance: 10 g, 16 ms (EN 60068-2-27) Test rate (internal test): 47 /s Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) TM (mission time): 20 a (EN ISO 13849) Restart interlock: + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Ambient operating temperature: -20 °C ... +55 °C Beam coding: + Category: Category 2 (EN ISO 13849) Type: Type 2 (IEC 61496) Switching current: 300 mA Typical range: 0 m ... 8 m Conductor cross-section: 0.34 mm² Permitted cable length: ≤ 20 m Housing material: Aluminum alloy ALMGSI 0.5 Switching voltage LOW: 2 V DC Weight: 115 g Resolution: 24 mm External device monitoring (delivery status): Deactivated Scanning range: 0 m ... 6 m Restart interlock (delivery status): Deactivated Configuration method: Hard wired Enclosure rating: IP 65 (EN 60529) Cascaded: + Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC)