C2MT-03024BBC03DB0

Specification: Part Number 1207945 Safe SICK device communication via EFI/SDL: - Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Typical range: 0 m ... 8 m Type: Type 2 (IEC 61496) Switching current: 300 mA Shock resistance: 10 g, 16 ms (EN 60068-2-27) Protection class: III (EN 61140) Category: Category 2 (EN ISO 13849) Restart interlock: + Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Permitted cable length: ≤ 20 m Housing material: Aluminum alloy ALMGSI 0.5 Ambient operating temperature: -20 °C ... +55 °C Switching voltage LOW: 2 V DC PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Conductor cross-section: 0.34 mm² External device monitoring (EDM): + Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Safe state in the event of a fault: At least one OSSD is in the OFF state. Protective field height: 300 mm Configuration method: Hard wired Response time: ≤ 13 ms Automatic beam coding: + Maximum demand rate: 34 /min (EN ISO 13849) TM (mission time): 20 a (EN ISO 13849) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Display elements: LEDs Test rate (internal test): 58 /s Enclosure rating: IP 65 (EN 60529) Air humidity: 15 % ... 95 %, non-condensing External device monitoring (delivery status): Deactivated Restart interlock (delivery status): Deactivated Resolution: 24 mm Beam coding: + Connection type: Male connector M12, 5-pin Power consumption: ≤ 3 A Housing cross-section (incl. system connection): 15 mm x 32 mm Weight: 115 g Ripple: ≤ 10 % Cascaded: - Scanning range: 0 m ... 6 m Cable length: 350 mm Storage temperature: -25 °C ... +70 °C Synchronization: Optical, without separate synchronization