C2MT-03024BBC03DE0

Specification: Part Number 1207825 Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Housing material: Aluminum alloy ALMGSI 0.5 Air humidity: 15 % ... 95 %, non-condensing Safe SICK device communication via EFI/SDL: - TM (mission time): 20 a (EN ISO 13849) Switching voltage LOW: 2 V DC Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Typical range: 0 m ... 8 m Housing cross-section (incl. system connection): 15 mm x 32 mm Configuration method: Hard wired Safe state in the event of a fault: At least one OSSD is in the OFF state. Type: Type 2 (IEC 61496) Switching current: 300 mA Conductor cross-section: 0.34 mm² Power consumption: ≤ 3 A Ripple: ≤ 10 % Enclosure rating: IP 65 (EN 60529) Storage temperature: -25 °C ... +70 °C Cable length: 350 mm Shock resistance: 10 g, 16 ms (EN 60068-2-27) Connection type: Male connector M12, 5-pin Cascaded: - Category: Category 2 (EN ISO 13849) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Test rate (internal test): 58 /s Automatic beam coding: + Scanning range: 0 m ... 6 m Protection class: III (EN 61140) Permitted cable length: ≤ 20 m Restart interlock: + Maximum demand rate: 34 /min (EN ISO 13849) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) External device monitoring (delivery status): Deactivated Display elements: LEDs Protective field height: 300 mm Restart interlock (delivery status): Deactivated Synchronization: Optical, without separate synchronization Ambient operating temperature: -20 °C ... +55 °C External device monitoring (EDM): + Weight: 115 g Resolution: 24 mm Beam coding: + Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Response time: ≤ 13 ms