C2MT-02434BBC03DB0

Specification: Part Number 1207963 Shock resistance: 10 g, 16 ms (EN 60068-2-27) Conductor cross-section: 0.34 mm² Category: Category 2 (EN ISO 13849) TM (mission time): 20 a (EN ISO 13849) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Housing material: Aluminum alloy ALMGSI 0.5 Cascaded: - Switching current: 300 mA Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Connection type: Male connector M12, 5-pin Ambient operating temperature: -20 °C ... +55 °C Storage temperature: -25 °C ... +70 °C External device monitoring (EDM): + External device monitoring (delivery status): Deactivated Switching voltage LOW: 2 V DC Power consumption: ≤ 3 A Display elements: LEDs Safe SICK device communication via EFI/SDL: - Air humidity: 15 % ... 95 %, non-condensing Configuration method: Hard wired Beam coding: + Type: Type 2 (IEC 61496) Scanning range: 0 m ... 6 m Test rate (internal test): 58 /s Permitted cable length: ≤ 20 m Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Weight: 95 g Enclosure rating: IP 65 (EN 60529) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Protection class: III (EN 61140) Resolution: 34 mm Ripple: ≤ 10 % Housing cross-section (incl. system connection): 15 mm x 32 mm Restart interlock: + Safe state in the event of a fault: At least one OSSD is in the OFF state. Cable length: 350 mm Automatic beam coding: + Maximum demand rate: 34 /min (EN ISO 13849) Protective field height: 240 mm Restart interlock (delivery status): Deactivated Typical range: 0 m ... 8 m Response time: ≤ 13 ms Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Synchronization: Optical, without separate synchronization