C2MT-02424BBC03DB0

Specification: Part Number 1207944 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Permitted cable length: ≤ 20 m Restart interlock: + Protection class: III (EN 61140) Scanning range: 0 m ... 6 m Storage temperature: -25 °C ... +70 °C Weight: 95 g Maximum demand rate: 34 /min (EN ISO 13849) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored External device monitoring (EDM): + Housing cross-section (incl. system connection): 15 mm x 32 mm Test rate (internal test): 58 /s Beam coding: + Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Safe state in the event of a fault: At least one OSSD is in the OFF state. Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Configuration method: Hard wired Cascaded: - Protective field height: 240 mm Switching voltage LOW: 2 V DC Automatic beam coding: + TM (mission time): 20 a (EN ISO 13849) Enclosure rating: IP 65 (EN 60529) Typical range: 0 m ... 8 m Cable length: 350 mm Shock resistance: 10 g, 16 ms (EN 60068-2-27) Display elements: LEDs Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Ambient operating temperature: -20 °C ... +55 °C Response time: ≤ 13 ms Switching current: 300 mA Resolution: 24 mm Restart interlock (delivery status): Deactivated Synchronization: Optical, without separate synchronization Air humidity: 15 % ... 95 %, non-condensing Connection type: Male connector M12, 5-pin Type: Type 2 (IEC 61496) Safe SICK device communication via EFI/SDL: - External device monitoring (delivery status): Deactivated Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Conductor cross-section: 0.34 mm² PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Power consumption: ≤ 3 A Category: Category 2 (EN ISO 13849) Housing material: Aluminum alloy ALMGSI 0.5 Ripple: ≤ 10 %