C2MT-02414BBC04DE0

Specification: Part Number 1207868 Display elements: LEDs Beam coding: + Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Maximum demand rate: 28 /min (EN ISO 13849) Typical range: 0 m ... 8 m Permitted cable length: ≤ 20 m Protection class: III (EN 61140) Scanning range: 0 m ... 6 m Conductor cross-section: 0.34 mm² Type: Type 2 (IEC 61496) Switching voltage LOW: 2 V DC Air humidity: 15 % ... 95 %, non-condensing Housing cross-section (incl. system connection): 15 mm x 32 mm Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Restart interlock (delivery status): Deactivated Shock resistance: 10 g, 16 ms (EN 60068-2-27) Configuration method: Hard wired Storage temperature: -25 °C ... +70 °C Automatic beam coding: + Power consumption: ≤ 3 A External device monitoring (EDM): + Cascaded: + Ambient operating temperature: -20 °C ... +55 °C Test rate (internal test): 47 /s Housing material: Aluminum alloy ALMGSI 0.5 Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) TM (mission time): 20 a (EN ISO 13849) PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Switching current: 300 mA Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Ripple: ≤ 10 % Restart interlock: + Category: Category 2 (EN ISO 13849) Weight: 95 g Enclosure rating: IP 65 (EN 60529) Protective field height: 240 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Connection type extension connection: Female connector M12, 5-pin Response time: ≤ 14 ms Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Connection type: Male connector M12, 5-pin Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Synchronization: Optical, without separate synchronization External device monitoring (delivery status): Deactivated Resolution: 14 mm Safe SICK device communication via EFI/SDL: - Cable length: 350 mm