Specification: Part Number 1032657 Bus interface: RS-485 Bearing lifetime: 3.6 x 10^9 revolutions Operating voltage range: 10 V ... 32 V Permissible relative humidity: 98 % SET (electronic adjustment): Via PRESET push button or protocol Power consumption max.: 2 W Max. angular acceleration: 600,000 rad/s² Shaft diameter: 12 mm Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Repeat
Specification: Part Number 1030045 Max. number of revolutions: 8,192 Max. angular acceleration: 600,000 rad/s² Resistance to shocks: 6 g (according to EN 60068-2-27) Mechanical interface: Through hollow shaft Resolution: 13 bit x 13 bit Status information: LED green (operation), LED red ( bus activity) Working temperature range: -20 °C ... 80 °C EMC: (according to EN 61000-6-2 and EN 61000-6-3) Resistanc
Specification: Part Number 1032661 Bus interface: RS-485 Housing material: Die-cast aluminum Max. number of revolutions: 4,096 Initialization time: 1,250 ms Error limits: ± 0.25 ° Moment of inertia of the rotor: 153 gcm² MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Address setting: 0 ... 127, DIP-switches or protocol Working temperature range: -20 °C ... 80 °C EMC: (according
Specification: Part Number 1032655 Max. number of revolutions: 2,048 Mechanical interface: Through hollow shaft Data protocol: Profile for encoders (07hex) - Class 2 Bus interface: RS-485 Moment of inertia of the rotor: 153 gcm² Working temperature range: -20 °C ... 80 °C Measuring step: 0.043 ° Permissible relative humidity: 98 % Resistance to shocks: 6 g (according to EN 60068-2-27) Operating t
Specification: Part Number 1032664 Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz Address setting: 0 ... 127, DIP-switches or protocol Max. number of revolutions: 4,096 Resistance to shocks: 6 g (according to EN 60068-2-27) Mechanical interface: Through hollow shaft Data protocol: Profile for encoders (07hex) - Class 2 Bus termination: DIP switch Bearing lifetime: 3.6 x 10^9 revolutions Housing material:
Specification: Part Number 1032658 Error limits: ± 0.25 ° Moment of inertia of the rotor: 153 gcm² EMC: (according to EN 61000-6-2 and EN 61000-6-3) Start up torque: 0.5 Ncm Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Operating voltage range: 10 V ... 32 V Max. number of steps per revolution: 8,192 Housing material: Die-cast aluminum Status information: LED green (operation), LED r
Specification: Part Number 1030046 Bearing lifetime: 3.6 x 10^9 revolutions MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Initialization time: 1,250 ms Measuring step: 0.043 ° Bus: PROFIBUS DP Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection Repeat accuracy: 0.1 ° EMC: (according to EN 61000-6-2 and EN 61000-6-3) Electrical interface: Bus adaptor with 3 cab
Specification: Part Number 1032898 Moment of inertia of the rotor: 153 gcm² Operating torque: 0.4 Ncm Bus interface: RS-485 Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Measuring step: 0.043 ° Bearing lifetime: 3.6 x 10^9 revolutions Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz Mass: 0.6 kg Error limits: ± 0.25 ° Max. angular acceleration: 600,000 rad/s² Max. number
Specification: Part Number 1032662 Shaft material: Stainless steel Operating voltage range: 10 V ... 32 V Address setting: 0 ... 127, DIP-switches or protocol Operating torque: 0.4 Ncm Repeat accuracy: 0.1 ° Resistance to shocks: 6 g (according to EN 60068-2-27) Shaft diameter: 16 mm SET (electronic adjustment): Via PRESET push button or protocol Power consumption max.: 2 W Housing material: Die-cast
Specification: Part Number 1032656 Initialization time: 1,250 ms Repeat accuracy: 0.1 ° Storage temperature range: -40 °C ... 125 °C, without package Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Data protocol: Profile for encoders (07hex) - Class 2 Housing material: Die-cast aluminum Bearing lifetime: 3.6 x 10^9 revolutions EMC: (according to EN 61000-6-2 and EN 61000-6-3) Working t
Specification: Part Number 1030044 Max. angular acceleration: 600,000 rad/s² Bus termination: DIP switch EMC: (according to EN 61000-6-2 and EN 61000-6-3) Max. number of steps per revolution: 8,192 Repeat accuracy: 0.1 ° Resolution power: 8,192 x 8,192 Operating voltage range: 10 V ... 32 V Resistance to shocks: 6 g (according to EN 60068-2-27) Storage temperature range: -40 °C ... 125 °C, without pack
Specification: Part Number 1032901 Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection SET (electronic adjustment): Via PRESET push button or protocol Flange material: Aluminum Mechanical interface: Through hollow shaft MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Electrical interface: Bus adaptor with 3 cable screw fixings Max. angular acceleration: 600,000 rad/s²
Specification: Part Number 1032665 Shaft material: Stainless steel Resolution: 12 bit x 12 bit Storage temperature range: -40 °C ... 125 °C, without package Flange material: Aluminum Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection Max. number of steps per revolution: 4,096 Operating torque: 0.4 Ncm Bus interface: RS-485 EMC: (according to EN 61000-6-2 and EN 61000-6-3)
Specification: Part Number 1032659 Electrical interface: Bus adaptor with 3 cable screw fixings Working temperature range: -20 °C ... 80 °C EMC: (according to EN 61000-6-2 and EN 61000-6-3) Start up torque: 0.5 Ncm Error limits: ± 0.25 ° Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Address setting: 0 ... 127, DIP-switches or protocol Moment of inertia of the rotor: 153 gcm² Max. nu
Specification: Part Number 1030047 Data protocol: Profile for encoders (07hex) - Class 2 MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Max. number of revolutions: 8,192 Bus interface: RS-485 Measuring step: 0.043 ° Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection Repeat accuracy: 0.1 ° Moment of inertia of the rotor: 153 gcm² Housing material: Die-cast a
Specification: Part Number 6039745 Linearity: ≤ ± 2 mm Housing material, wire draw mechanism: Plastic, Noryl Encoder: Absolute encoders Actual length of cable extension: 1.45 m Life of wire draw mechanism: 1 million cycles Supply voltage: 19 V ... 33 V Mounted mechanic: MRA-G055-101D4 Enclosure rating encoder: IP 65 Enclosure rating mechanic: IP 50 Part number mechanic: 5324019 Resistance to v
Specification: Part Number 6039746 EMC: (according to EN 61000-6-2 and EN 61000-6-3) Length of wire pulled out per revolution: 150 mm Resistance to shocks: 50 g, 6 ms (according to EN 60068-2-27) Encoder: Absolute encoders Clock frequency: 32 kHz Resistance to vibration: 4 g, Sinus 5 Hz ... 100 Hz (according to EN 60068-2-6) Working temperature range (mechanics): -30 °C ... +70 °C Measuring wire diameter: 0.
Specification: Part Number 1061025 Linearity: ≤ ± 2 mm Length of wire pulled out per revolution: 230 mm Repeatability: ≤ 0.2 mm Enclosure rating encoder: IP 67 Clock frequency: 1 MHz 2 MHz Part number mechanic: 5322778 Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Mass (including encoder): 510 g Actual length of cable extension: 3.2 m Wire acceleration: 10 m/s²
Specification: Part Number 1054129 Measuring range: 0 m ... 3 m Hysteresis: ≤ 0.4 mm MTTFd: mean time to dangerous failure: 250 a Operating speed: 4 m/s Wire acceleration: 10 m/s² Mass (including encoder): 510 g Length of wire pulled out per revolution: 230 mm Encoder: Absolute encoders Mounted encoder: AFM60 SSI Enclosure rating mechanic: IP 50 Measuring wire material: Highly flexible stran
Specification: Part Number 1054131 Actual length of cable extension: 3.2 m Resistance to shocks: 70 g, 6 ms (according to EN 60068-2-27) Relative humidity / Condensation: 90 % (condensation of the optical scanning not permitted) Working temperature range (encoder): -30 °C ... +70 °C, with AFM60B, 0 °C ... +70 °C, with AFM60E Resolution (wire draw + encoder): 0.03 mm Mass (measuring wire): 1.2 g/m MTTFd: mean
Specification: Part Number 1068867 Bus termination: Via external termination resistance Address setting: 0 ... 127 Hysteresis: ≤ 0.4 mm Enclosure rating mechanic: IP 50 Wire acceleration: 10 m/s² Length of wire pulled out per revolution: 230 mm Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) SET (electronic adjustment): Via PRESET push button or protocol Part number mechan
Specification: Part Number 1061027 Protocol: DeviceNet Specification Release 2.0 Working temperature range (encoder): -20 °C ... +70 °C Operating speed: 4 m/s Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Measuring wire diameter: 0.55 mm Part number encoder: 1030018 Length of wire pulled out per revolution: 230 mm Mass (including encoder): 840 g Part number mechanic: 5322778 Repeatabi
Specification: Part Number 1061030 Life of wire draw mechanism: 1 million cycles SET (electronic adjustment): Via PRESET push button or protocol Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Mass (mechanics): 250 g Linearity: ≤ ± 2 mm Power consumption: 3 W Working temperature range (encoder): -30 °C ... +70 °C Mounted mechanic: MRA-G080-103D3 Mass (including encoder): 450 g Ini
Specification: Part Number 1061029 Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik EMC: (according to EN 61000-6-2 and EN 61000-6-3) Operating speed: 4 m/s Protocol: EtherNet/IP IEC 61784-1 Enclosure rating encoder: IP 67 Working temperature range (encoder): -30 °C ... +70 °C Housing material
Specification: Part Number 6039747 Mass (including encoder): 650 g Initialization time: ≤ 2 ms Supply voltage: 19 V ... 33 V Repeatability: ≤ 0.2 mm Mounted mechanic: MRA-G080-103D3 Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A Working temperature range (mechanics): -30 °C ... +70 °C Connection type: Cable, 3-wire, radial, 1.5 m Resistance to shocks: 50 g, 6 m
Specification: Part Number 1061028 Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A Encoder: Absolute encoders Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Wire acceleration: 10 m/s²
Specification: Part Number 1052618 Part number encoder: 1051018 Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik Resistance to shocks: 80 g, 6 ms (according to EN 60068-2-27) Measuring range: 0 m ... 3 m Working temperature range (encoder): -10 °C ... +70 °C Actual length of cable extension: 3.2
Specification: Part Number 1061033 Electrical interface: SSI Resolution (wire draw + encoder): 0.1 mm Mounted mechanic: MRA-G130-105D3 Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A Operating speed: 4 m/s Encoder: Absolute encoders Enclosure rating encoder: IP 67 SET (electronic adjustment): Via SET cable Working temperature range (mechanics): -30 °C ... +70 °C Li
Specification: Part Number 1061031 Actual length of cable extension: 5.2 m Mass (including encoder): 1.06 kg Clock frequency: 1 MHz 2 MHz Housing material, wire draw mechanism: Plastic, Noryl Relative humidity / Condensation: 90 % (condensation of the optical scanning not permitted) EMC: (according to EN 61000-6-2 and EN 61000-6-3) Repeatability: ≤ 0.2 mm Mass (measuring wire): 1.2 g/m Measuring wire ma
Specification: Part Number 1061032 Code type: Gray EMC: (according to EN 61000-6-2 and EN 61000-6-3) Working temperature range (mechanics): -30 °C ... +70 °C Mounted mechanic: MRA-G130-105D3 Measuring range: 0 m ... 5 m Clock frequency: 1 MHz 2 MHz Mounted encoder: AFM60 SSI Part number mechanic: 5322779 Mass (including encoder): 1.06 kg MTTFd: mean time to dangerous failure: 250 a Supply voltag
