Specification: Part Number 1055028 Clock frequency: 1 MHz Moment of inertia of the rotor: 40 gcm² Repeat accuracy: 0.002 ° Measuring step deviation: ± 0.2 ° Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Operating voltage range: 4.5 V DC ... 32 V DC Maximum output frequency: 200 kHz Maximum operating speed: 9,000 /min Enclosure rating: IP 65 (according to IEC
Specification: Part Number 1054600 Resistance to shocks: 50 g, 6 ms (according to EN 60068-2-27) Working temperature range: 0 °C ... +85 °C Mechanical interface: Through hollow shaft Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Connection type: Connector M23, 12-pin, radial Electrical interface: SSI/Gray + Incremental, HTL Resolution power: 4,096 x 4,096 EMC: (acc
Specification: Part Number AFM60E-TGAA004096 Start up torque: 0.8 Ncm (+20 °C) Resolution: 12 bit x 12 bit Power consumption: 0.5 W (without load) MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Code type: Gray Max. number of steps per revolution: 4,096 Electrical interface: SSI/Gray Mechanical interface: Through hollow shaft Moment of inertia of the rotor: 40 gcm² Maximum operating spe
Specification: Part Number AFM60E-TGLA004096 Connection type: Connector M23, 12-pin, radial Operating voltage range: 4.5 V DC ... 32 V DC Shaft diameter: 14 mm Max. number of revolutions: 4,096 Reverse polarity protection: 1 Code sequence: CW/CCW, parameter adjustable Electrical interface: SSI/Gray + Incremental, HTL Reference signal, position: 90 °, electronically, gated with A and B Mechanical interface
Specification: Part Number 1054193 Measuring step deviation: ± 0.2 ° EMC: (according to EN 61000-6-2 and EN 61000-6-3) Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Max. number of revolutions: 4,096 Maximum operating speed: 9,000 /min Connection type: Cable, 8-wire, universal, 1.5 m Resistance to shocks: 50 g, 6 ms (according to EN 60068-2-27) Interface signals: Clock +, Clock -, Data +
Specification: Part Number 1053128 Resolution power: 4,096 x 4,096 Max. angular acceleration: 500,000 rad/s² Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Clock frequency: 1 MHz CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Measuring step: 0.09 ° 360 ° / number of steps Initialization time: 50 ms EMC: (according to EN 61000-6-2 and EN 6100
Specification: Part Number 1065327 Start up torque: 0.8 Ncm (+20 °C) Interface signals: A, B: digital differential, Clock +, Clock -, Data +, Data- EMC: (according to EN 61000-6-2 and EN 61000-6-3) Code sequence: CW/CCW, parameter adjustable Mass: 0.2 kg Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Moment of inert
Specification: Part Number 1051632 CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Measuring step: 0.014 ° 360 ° / number of steps MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Resolution power: 262,144 x 1 Operating torque: 0.6 Ncm (20 °C) Bearing lifetime: 3.0 x 10^9 revolutions Connection type: Connector M23, 12-pin, radial Max. number of step
Specification: Part Number 1038221 Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.05 mm Mechanical interface: Blind hollow shaft Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.01 mm Resolution power: 262,144 x 1 Connection type: Connector M23, 12-pin, radial Shaft diameter: 10 mm Operating voltage range: 4.5 V DC ... 32 V DC CW/CCW (counting sequence when turning): L-active (L &;8801;
Specification: Part Number 1037930 SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Max. number of steps per revolution: 262,144 Max. number of revolutions: 1 Electrical interface: SSI/Gray, programmable Operating torque: 0.6 Ncm (20 °C) Type of mounting shaft: Blind hollow shaft Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.01 mm Maximum operating speed: 6,000 /m
Specification: Part Number 1038039 Start up torque: 0.8 Ncm (20 °C) Storage temperature range: -40 °C ... 100 °C, without package Reverse polarity protection: 1 Interface signals: Clock +, Clock -, Data +, Data- Bearing lifetime: 3.0 x 10^9 revolutions Max. number of revolutions: 1 Mechanical interface: Blind hollow shaft Moment of inertia of the rotor: 40 gcm² MTTFd: mean time to dangerous failure: 25
Specification: Part Number 1053684 Power consumption: 0.5 W (without load) Clock frequency: 2 MHz Initialization time: 50 ms Bearing lifetime: 3.0 x 10^9 revolutions Storage temperature range: -40 °C ... 100 °C, without package Mass: 0.2 kg Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Measuring step: 0.014 ° 360 ° / number of steps Mechanical interface: Bli
Specification: Part Number 1051352 Initialization time: 50 ms Clock frequency: 2 MHz SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.01 mm Moment of inertia of the rotor: 40 gcm² Code type: Gray Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Enclosure rating: IP 65 (according to IEC 60
Specification: Part Number 1055360 Mechanical interface: Blind hollow shaft Operating voltage range: 10 V DC ... 30 V DC EMC: (according to EN 61000-6-2 and EN 61000-6-3) Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Bus interface: EtherNet/IP IEC 61784-1 Data transmission rate (baud rate): 10 Mbit/s / 100 Mbit/s Housing material: Aluminum Reverse polarity protection: 1 Stor
Specification: Part Number 1051500 Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Bearing lifetime: 3.0 x 10^9 revolutions Reverse polarity protection: 1 Working temperature range: -30 °C ... 100 °C Permissible Load capacity of shaft: 40 N (axial), 80 N (radial) Start up torque: 0.5 Ncm (20 °C) Max. number of revolutions: 1 MTTFd: mean time to dangerous failure: 250
Specification: Part Number 1037445 Interface signals: Clock +, Clock -, Data +, Data- Max. number of revolutions: 1 Mechanical interface: Solid shaft, Servo flange Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Start up torque: 0.5 Ncm (20 °C) Storage temperature range: -40 °C ... 100 °C, without package Shaft diameter: 6 mm Resolution power: 262,144 x 1 MTTFd: m
Specification: Part Number 1037446 Repeat accuracy: 0.002 ° SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Initialization time: 50 ms Mechanical interface: Solid shaft, Servo flange Type of mounting shaft: Solid shaft Start up torque: 0.5 Ncm (20 °C) EMC: (according to EN 61000-6-2 and EN 61000-6-3) Clock frequency: 2 MHz Electrical interface: SSI/Gray Operating v
Specification: Part Number 1052349 Resolution power: 65,536 x 1 Electrical interface: SSI/Gray Error limits: ± 0.03 ° Bearing lifetime: 3.0 x 10^9 revolutions Clock frequency: 2 MHz Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Maximum operating speed: 9,000 /min Operating torque: 0.3 Ncm (20 °C) Type of mounting shaft: Solid shaft Max. number of revolutions: 1 Operating voltage
Specification: Part Number 1037646 Working temperature range: -30 °C ... 100 °C : Servo flange Storage temperature range: -40 °C ... 100 °C, without package SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Code type: Gray Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Measuring step deviation: ± 0.002 ° Operating
Specification: Part Number 1037498 Electrical interface: SSI/Gray, programmable Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Max. number of revolutions: 1 Initialization time: 50 ms Operating voltage range: 4.5 V DC ... 32 V DC Start up torque: 0.5 Ncm (20 °C) Resolution power: 262,144 x 1 Measuring step: 0.014 ° 360 ° / number of steps CW/CCW (counting sequence when tur
Specification: Part Number 1037500 SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Type of mounting shaft: Solid shaft Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Repeat accuracy: 0.002 ° Code type: Gray : Servo flange Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Electric
Specification: Part Number 1037501 Measuring step: 0.014 ° 360 ° / number of steps Power consumption: 0.5 W (without load) Operating torque: 0.3 Ncm (20 °C) Permissible Load capacity of shaft: 40 N (axial), 80 N (radial) Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) : Servo flange Bearing lifetime: 3.0 x 10^9 revolutions Type of mounting shaft: Solid shaft Max. number of steps per revolut
Specification: Part Number 1037502 Electrical interface: SSI/Gray, programmable Mechanical interface: Solid shaft, Servo flange Operating voltage range: 4.5 V DC ... 32 V DC Maximum operating speed: 9,000 /min Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Code type: Gray Permissible relative humidity: 90 % (condensation of the optical scanning not permi
Specification: Part Number 1052247 Reverse polarity protection: 1 Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Shaft diameter: 10 mm Bearing lifetime: 3.0 x 10^9 revolutions Initialization time: 50 ms Type of mounting shaft: Solid shaft with flat Power consumption: 0.5 W (without load) Operating voltage range: 4.5 V DC ... 32 V DC Max. number o
Specification: Part Number 1053807 Bearing lifetime: 3.0 x 10^9 revolutions Moment of inertia of the rotor: 6.2 gcm² Interface signals: Clock +, Clock -, Data +, Data- Electrical interface: SSI/Gray EMC: (according to EN 61000-6-2 and EN 61000-6-3) Clock frequency: 2 MHz Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Working temperature range: -30
Specification: Part Number 1037914 Operating torque: 0.3 Ncm (20 °C) CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Initialization time: 50 ms Operating voltage range: 4.5 V DC ... 32 V DC Bearing lifetime: 3.0 x 10^9 revolutions Shaft diameter: 10 mm Code sequence: CW/CCW, parameter adjustable Permissible relative humidity: 90 % (condensation of the optical sca
Specification: Part Number 1054929 Code type: Gray Max. number of steps per revolution: 131,072 Bearing lifetime: 3.0 x 10^9 revolutions Reverse polarity protection: 1 Electrical interface: SSI/Gray : Face mount flange Interface signals: Clock +, Clock -, Data +, Data- CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Mass: 0.26 kg Repeat accuracy: 0.002 °
