AFM60E-TEKA004096

Specification: Part Number 1055028 Clock frequency: 1 MHz Moment of inertia of the rotor: 40 gcm² Repeat accuracy: 0.002 ° Measuring step deviation: ± 0.2 ° Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Operating voltage range: 4.5 V DC ... 32 V DC Maximum output frequency: 200 kHz Maximum operating speed: 9,000 /min Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side Signal before differential generation: ± 20 % MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Load resistance min.: 120 &;937; Connection type: Connector M23, 12-pin, radial Power consumption: 0.5 W (without load) Resolution power: 4,096 x 4,096 Operating torque: 0.6 Ncm (+20 °C) Max. angular acceleration: 500,000 rad/s² EMC: (according to EN 61000-6-2 and EN 61000-6-3) Working temperature range: 0 °C ... +85 °C Initialization time: 50 ms Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Electrical interface: SSI/Gray + Sin/Cos, 1.024 Perioden Error limits: ± 0.3 ° Storage temperature range: -40 °C ... +100 °C, without package Reverse polarity protection: 1 Mass: 0.2 kg Code type: Gray Resolution: 12 bit x 12 bit Resistance to shocks: 50 g, 6 ms (according to EN 60068-2-27) Interface signals: Clock +, Clock -, Data +, Data-, Sin +, Sin - , Cos + , Cos -: analog, differential CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Start up torque: 0.8 Ncm (+20 °C) Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Max. number of steps per revolution: 4,096 Code sequence: CW/CCW, parameter adjustable Bearing lifetime: 3.0 x 10^9 revolutions Signal offset: 2.5 V ± 10 % Max. number of revolutions: 4,096 Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Mechanical interface: Through hollow shaft Shaft diameter: 12 mm