AFS60A-BBAA262144

Specification: Part Number 1051632 CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Measuring step: 0.014 ° 360 ° / number of steps MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Resolution power: 262,144 x 1 Operating torque: 0.6 Ncm (20 °C) Bearing lifetime: 3.0 x 10^9 revolutions Connection type: Connector M23, 12-pin, radial Max. number of steps per revolution: 262,144 Shaft diameter: 8 mm Measuring step deviation: ± 0.002 ° Electrical interface: SSI/Gray Operating voltage range: 4.5 V DC ... 32 V DC Storage temperature range: -40 °C ... 100 °C, without package Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.05 mm Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Working temperature range: -30 °C ... 100 °C SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Max. number of revolutions: 1 Error limits: ± 0.03 ° Interface signals: Clock +, Clock -, Data +, Data- Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Repeat accuracy: 0.002 ° Moment of inertia of the rotor: 40 gcm² Code type: Gray Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Mechanical interface: Blind hollow shaft Initialization time: 50 ms EMC: (according to EN 61000-6-2 and EN 61000-6-3) Clock frequency: 2 MHz Power consumption: 0.5 W (without load) Maximum operating speed: 6,000 /min Code sequence: CW/CCW, parameter adjustable Mass: 0.2 kg Start up torque: 0.8 Ncm (20 °C) Type of mounting shaft: Blind hollow shaft Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Max. angular acceleration: 500,000 rad/s² Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.01 mm Reverse polarity protection: 1