Specification: Part Number 1056927 Signal voltage HIGH: Vs - 2 V Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 Temperature drift: < 0.1 mm/K RoHS certificate: + Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK Medium: Fluids Repeatability: ≤ 2 mm Signal voltage LOW: ≤ 2 V Interference emission: EN 61000-6-4:2007 IO-Link: + Connection type: Round connector M12 x 1, 5-pin 3-A: - Accura
Specification: Part Number 1057094 Process pressure: -1 bar ... 10 bar Supply voltage: 12 V DC ... 30 V DC Wetted parts: 1.4404, PTFE Conductivity: No limitation Lower signal level: 3.8 mA ... 4 mA Probe type: Mono rod probe Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Hysteresis: Min. 2 mm, free adjustable Maximum level
Specification: Part Number 1062266 Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Housing material: Plastic PBT EMC: EN 61326-1:2006, 2004/108/EG Output signal: 1 PNP transistor output (Q1) und 3 PNP / NPN transistor output (Q2...Q4) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. IO-Link: + Ambient t
Specification: Part Number 1056225 Inactive area at process connector: 25 mm Hysteresis: Min. 2 mm, free adjustable Measurement: Switch, Continuous Signal voltage HIGH: Vs - 2 V Upper signal level: 20 mA ... 20.5 mA Accuracy of sensor element: ± 5 mm Repeatability: ≤ 2 mm Lower signal level: 3.8 mA ... 4 mA EMC: EN 61326-1:2006, 2004/108/EG Conductivity: No limitation Process pressure: -1 bar
Specification: Part Number 1071078 Initialization time: ≤ 5 s Probe type: Mono rod probe Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono rod probe / rope probe Resolution: < 2 mm Ambient storage temperature: -40 °C ... +80 °C Hysteresis: Min. 2 mm, free adjustable Signal voltage LOW: ≤ 2 V IO-Link: + Output current: < 100 mA Maximum level change: 500 mm/s Ambient temper
Specification: Part Number 1071081 Signal voltage LOW: ≤ 2 V Initialization time: ≤ 5 s Measurement: Switch, Continuous Medium: Fluids Ambient storage temperature: -40 °C ... +80 °C Lower signal level: 3.8 mA ... 4 mA Connection type: Round connector M12 x 1, 5-pin Max.probe load: 6 Nm Process temperature: -20 °C ... +100 °C Output current: < 100 mA Ambient temperature coaxial cable: -20
Specification: Part Number 1071085 Protection class: III Max.probe load: 6 Nm Signal voltage LOW: ≤ 2 V Enclosure rating: IP 67: EN 60529 Repeatability: ≤ 2 mm Response time: < 400 ms IO-Link: + Accuracy of sensor element: ± 5 mm Wetted parts: 1.4404, PTFE Measurement: Switch, Continuous EMC: EN 61326-1:2006, 2004/108/EG Output current: < 100 mA Process pressure: -1 bar ... 10 bar
Specification: Part Number 1071088 IO-Link: + Lower signal level: 3.8 mA ... 4 mA Probe length: 500 mm Repeatability: ≤ 2 mm Length coaxial cable: PVC Ambient temperature coaxial cable: -20 °C ... +60 °C Supply voltage: 12 V DC ... 30 V DC Maximum level change: 500 mm/s Signal voltage LOW: ≤ 2 V Conductivity: No limitation Design: Remote amplifier, cable length 1 m Wetted parts: 1.4404
Specification: Part Number 1071091 Signal voltage LOW: ≤ 2 V Capacitive load: 100 nF Accuracy of sensor element: ± 5 mm Repeatability: ≤ 2 mm Design: Remote amplifier, cable length 2 m Protection class: III Response time: < 400 ms Inductive load: < 1 H Output current: < 100 mA Maximum level change: 500 mm/s Output signal: 1 PNP transistor output (Q1) und 3 PNP / NPN transistor output (Q2
Specification: Part Number 1071095 Protection class: III Enclosure rating: IP 67: EN 60529 MTTF: 194.3 a (EN ISO 13849-1) Repeatability: ≤ 2 mm Response time: < 400 ms Power consumption: ≤ 100 mA at 24 V DC without output load Connection type: Round connector M12 x 1, 8-pin Signal voltage LOW: ≤ 2 V Inductive load: < 1 H Probe type: Mono rod probe Max.probe load: 6 Nm Initialization t
Specification: Part Number 1071098 Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Length coaxial cable: 1 m, PVC Power consumption: ≤ 100 mA at 24 V DC without output load Initialization time: ≤ 5 s Design: Remote amplifier, cable length 1 m Accuracy of sensor element: ± 5 mm RoHS certificate: + Output signal: 1 PNP tra
Specification: Part Number 1071101 Wetted parts: 1.4404, PTFE Max.probe load: 6 Nm Inductive load: < 1 H Hysteresis: Min. 2 mm, free adjustable Temperature drift: < 0.1 mm/K GOST approval: + Response time: < 400 ms Capacitive load: 100 nF Medium: Fluids RoHS certificate: + CULus certificate: + Ambient temperature coaxial cable: -20 °C ... +60 °C Supply voltage: 12 V DC ... 30 V DC
Specification: Part Number 1071105 Resolution: < 2 mm Inactive area at probe end: 10 mm Accuracy of sensor element: ± 5 mm Temperature drift: < 0.1 mm/K Inductive load: < 1 H MTTF: 194.3 a (EN ISO 13849-1) Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Lower signal level: 3.8 mA ... 4 mA Dielectricity constant: ≥ 1
Specification: Part Number 1071108 Temperature drift: < 0.1 mm/K GOST approval: + MTTF: 194.3 a (EN ISO 13849-1) Measurement: Switch, Continuous Output current: < 100 mA Resolution: < 2 mm Probe type: Mono rod probe Capacitive load: 100 nF Maximum level change: 500 mm/s EMC: EN 61326-1:2006, 2004/108/EG Process connection: ¾" NPT Process temperature: -20 °C ... +100 °C Medium: Fluids
Specification: Part Number 1071111 Inductive load: < 1 H Process pressure: -1 bar ... 10 bar Length coaxial cable: 2 m, PVC Hysteresis: Min. 2 mm, free adjustable Ambient temperature operation: -20 °C ... +60 °C Probe length: 500 mm Signal voltage HIGH: Vs - 2 V Enclosure rating: IP 67: EN 60529 Ambient temperature coaxial cable: -20 °C ... +60 °C Probe type: Mono rod probe Response time: < 4
Specification: Part Number 1071115 Design: Remote amplifier, cable length 3 m Output current: < 100 mA Output signal: 1 PNP transistor output (Q1) und 3 PNP / NPN transistor output (Q2...Q4) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Accuracy of sensor element: ± 5 mm Ambient temperature operation: -20 °C ... +60 °C Dielectricity constant: ≥ 1.8 with coaxial tube, ≥
Specification: Part Number 1062267 Power consumption: ≤ 100 mA at 24 V DC without output load Maximum level change: 500 mm/s Process temperature: -20 °C ... +100 °C RoHS certificate: + Design: Standard Response time: < 400 ms Ambient storage temperature: -40 °C ... +80 °C Supply voltage: 12 V DC ... 30 V DC Hysteresis: Min. 2 mm, free adjustable Dielectricity constant: ≥ 1.8 with coaxial tu
Specification: Part Number 1071121 Inactive area at probe end: 10 mm Repeatability: ≤ 2 mm Housing material: 303 EMC: EN 61326-1:2006, 2004/108/EG Initialization time: ≤ 2 s Upper signal level: 20 mA ... 20.5 mA Housing design: With PMMA viewing window IO-Link: + Ambient temperature coaxial cable: -20 °C ... +60 °C Medium: Fluids Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ...
Specification: Part Number 1071125 Output current: < 100 mA Medium: Fluids Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 Temperature drift: < 0.1 mm/K Signal voltage HIGH: Vs - 2 V Resolution: < 2 mm Upper signal level: 20 mA ... 20.5 mA Single- and continuous shock: EN 60068-2-27 Connection type: Round connector M12 x 1, 5-pin Repeatability: ≤ 2 mm Accuracy of sensor element: ± 5 mm
Specification: Part Number 1056288 Supply voltage: 12 V DC ... 30 V DC Lower signal level: 3.8 mA ... 4 mA Connection type: Round connector M12 x 1, 5-pin RoHS certificate: + Process temperature: -20 °C ... +150 °C Power consumption: ≤ 75 mA at 24 V DC without output load Protection class: III Capacitive load: 100 nF Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 400 Ohm at Uv
Specification: Part Number 1071133 Protection class: III Process connection: ¾" NPT Output current: < 100 mA Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono probe Lower signal level: 3.8 mA ... 4 mA Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 Temperature drift: < 0.1 mm/K RoHS certificate: + Measurement: Switch, Continuous EMC: EN 61326-1:2006, 2004/108/EG Interference
Specification: Part Number 1071136 Power consumption: ≤ 75 mA at 24 V DC without output load Ambient storage temperature: -40 °C ... +80 °C Signal voltage LOW: ≤ 2 V Protection class: III Max.probe load: 6 Nm Temperature drift: < 0.1 mm/K Capacitive load: 100 nF EMC: EN 61326-1:2006, 2004/108/EG Housing material: 303 EHEDG approval: + Housing design: With PMMA viewing window Medium: Fl
Specification: Part Number 1071140 Length coaxial cable: 3.3 m, FEP Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 400 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 13,5 V Process temperature: -20 °C ... +180 °C IO-Link: + Power consumption: ≤ 75 mA at 24 V DC without output load Hysteresis: Min. 2 mm, free adjustable EHEDG approval: + Interference emission: EN 61000-6-4:200
Specification: Part Number 1058043 Signal voltage HIGH: Vs - 2 V Ambient temperature operation: -20 °C ... +60 °C Temperature drift: < 0.1 mm/K GOST approval: + Lower signal level: 3.8 mA ... 4 mA Process pressure: -1 bar ... 16 bar Supply voltage: 12 V DC ... 30 V DC Max.probe load: 6 Nm Hysteresis: Min. 2 mm, free adjustable Resolution: < 2 mm Dielectricity constant: ≥ 1.8 with coaxial tu
Specification: Part Number 1062249 Max.probe load: 6 Nm Signal voltage HIGH: Vs - 2 V Temperature drift: < 0.1 mm/K Ambient temperature operation: -20 °C ... +60 °C Upper signal level: 20 mA ... 20.5 mA Housing material: Plastic PBT Inactive area at probe end: 10 mm EMC: EN 61326-1:2006, 2004/108/EG Signal voltage LOW: ≤ 2 V Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono rod
Specification: Part Number 1062268 GOST approval: + Protection class: III Temperature drift: < 0.1 mm/K Upper signal level: 20 mA ... 20.5 mA Accuracy of sensor element: ± 5 mm Conductivity: No limitation Initialization time: ≤ 5 s Housing material: Plastic PBT Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V RoHS ce
Specification: Part Number 1056289 Lower signal level: 3.8 mA ... 4 mA Medium: Fluids RoHS certificate: + Power consumption: ≤ 75 mA at 24 V DC without output load Accuracy of sensor element: ± 5 mm Inactive area at probe end: 10 mm Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono probe Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK MTTF: 194.3 a (EN ISO 13849-1) Signal voltage LOW:
Specification: Part Number 1059412 Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 Response time: < 400 ms Connection type: Round connector M12 x 1, 5-pin Ambient storage temperature: -40 °C ... +80 °C Lower signal level: 3.8 mA ... 4 mA Housing material: 303 Measurement: Switch, Continuous Repeatability: ≤ 2 mm Process connection: ¾" NPT Power consumption: ≤ 75 mA at 24 V DC without out
Specification: Part Number 1071086 Temperature drift: < 0.1 mm/K EMC: EN 61326-1:2006, 2004/108/EG Inactive area at process connector: 25 mm GOST approval: + Max.probe load: 6 Nm Protection class: III Ambient temperature coaxial cable: -20 °C ... +60 °C Hysteresis: Min. 2 mm, free adjustable Signal voltage HIGH: Vs - 2 V Measurement: Switch, Continuous Capacitive load: 100 nF Power consumpti
Specification: Part Number 1071096 Temperature drift: < 0.1 mm/K Ambient temperature operation: -20 °C ... +60 °C RoHS certificate: + Conductivity: No limitation Probe type: Mono rod probe Supply voltage: 12 V DC ... 30 V DC Inactive area at process connector: 25 mm Resolution: < 2 mm IO-Link: + Housing material: Plastic PBT Accuracy of sensor element: ± 5 mm Initialization time: ≤ 5
