LFP0700-A5DMC

Specification: Part Number 1071096 Temperature drift: < 0.1 mm/K Ambient temperature operation: -20 °C ... +60 °C RoHS certificate: + Conductivity: No limitation Probe type: Mono rod probe Supply voltage: 12 V DC ... 30 V DC Inactive area at process connector: 25 mm Resolution: < 2 mm IO-Link: + Housing material: Plastic PBT Accuracy of sensor element: ± 5 mm Initialization time: &le; 5 s Maximum level change: 500 mm/s Hysteresis: Min. 2 mm, free adjustable EMC: EN 61326-1:2006, 2004/108/EG Protection class: III Inductive load: < 1 H Design: Remote amplifier, cable length 3 m CULus certificate: + Probe length: 700 mm GOST approval: + Max.probe load: 6 Nm Upper signal level: 20 mA ... 20.5 mA Measurement: Switch, Continuous Repeatability: &le; 2 mm Enclosure rating: IP 67: EN 60529 Output signal: 1 PNP transistor output (Q1) und 3 PNP / NPN transistor output (Q2...Q4) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Output current: < 100 mA Inactive area at probe end: 10 mm Capacitive load: 100 nF Wetted parts: 1.4404, PTFE Lower signal level: 3.8 mA ... 4 mA Medium: Fluids Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Response time: < 400 ms Ambient temperature coaxial cable: -20 °C ... +60 °C Process temperature: -20 °C ... +100 °C Connection type: Round connector M12 x 1, 8-pin Signal voltage HIGH: Vs - 2 V Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono rod probe / rope probe MTTF: 194.3 a (EN ISO 13849-1) Power consumption: &le; 100 mA at 24 V DC without output load Signal voltage LOW: &le; 2 V Process pressure: -1 bar ... 10 bar Ambient storage temperature: -40 °C ... +80 °C Length coaxial cable: 3.3 m, PVC Process connection: G ¾ A