LFP0700-A4DMB

Specification: Part Number 1071086 Temperature drift: < 0.1 mm/K EMC: EN 61326-1:2006, 2004/108/EG Inactive area at process connector: 25 mm GOST approval: + Max.probe load: 6 Nm Protection class: III Ambient temperature coaxial cable: -20 °C ... +60 °C Hysteresis: Min. 2 mm, free adjustable Signal voltage HIGH: Vs - 2 V Measurement: Switch, Continuous Capacitive load: 100 nF Power consumption: &le; 100 mA at 24 V DC without output load Supply voltage: 12 V DC ... 30 V DC Inductive load: < 1 H MTTF: 194.3 a (EN ISO 13849-1) Initialization time: &le; 5 s Output current: < 100 mA Medium: Fluids Inactive area at probe end: 10 mm Enclosure rating: IP 67: EN 60529 Upper signal level: 20 mA ... 20.5 mA RoHS certificate: + CULus certificate: + Process temperature: -20 °C ... +100 °C Resolution: < 2 mm Response time: < 400 ms Repeatability: &le; 2 mm Process connection: G ¾ A Maximum level change: 500 mm/s Process pressure: -1 bar ... 10 bar IO-Link: + Ambient storage temperature: -40 °C ... +80 °C Probe length: 700 mm Ambient temperature operation: -20 °C ... +60 °C Wetted parts: 1.4404, PTFE Length coaxial cable: 3.3 m, PVC Conductivity: No limitation Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Accuracy of sensor element: ± 5 mm Lower signal level: 3.8 mA ... 4 mA Probe type: Mono rod probe Connection type: Round connector M12 x 1, 5-pin Output signal: 1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Signal voltage LOW: &le; 2 V Housing material: Plastic PBT Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono rod probe / rope probe Design: Remote amplifier, cable length 3 m