Specification: Part Number AHM36A-BDCJ014x12 Status information: CANopen Status über Status-LED PDO data: Speed, Position, Temperature Start up torque: 1 Ncm (+20 °C) Max. number of steps per revolution: 16,384, number of steps from 1 to 16,384 programmable Resolution: 14 bit x 12 bit Shaft material: Stainless steel Working temperature range: -40 °C ... +85 °C Enclosure rating: IP 66 / IP 67 (according t
Specification: Part Number 1066009 Resolution: 14 bit x 12 bit Mass: 0.12 kg (for an encoder with connector outlet) Reverse polarity protection: 1 Operating torque: < 1 Ncm (+20 °C) Start up torque: 1 Ncm (+20 °C) Housing material: Zinc EMC: (according to EN 61000-6-2 and EN 61000-6-3) CW/CCW (counting sequence when turning): L-active (L = 0 - 1 V, H = 2,0 - Us V) Moment of inertia of the rotor: 2.5 g
Specification: Part Number 1065999 Max. number of revolutions: 4,096, number of revolutions from 1 to 4,096 programmable EMC: (according to EN 61000-6-2 and EN 61000-6-3) Bearing lifetime: 3.6 x 10^8 revolutions Storage temperature range: -40 °C ... +100 °C, without package Mass: 0.12 kg (for an encoder with connector outlet) Address setting: 0 ... 127 Power consumption max. without load: 1.5 W Max. angular a
Specification: Part Number 1066007 Parameterising data: Number of revolutions (only Multiturn version), Code type, Position Errorbit, PRESET, Endless operating functionality (only Multiturn version), Number of steps per revolution, SSI mode, Verschiebung Positionsbits, Zählrichtung Shaft diameter: 6 mm Mechanical interface: Solid shaft, Face mount flange EMC: (according to EN 61000-6-2 and EN 61000-6-3) Operating voltage
Specification: Part Number AHM36A-S4CC014x12 PDO data: Speed, Position, Temperature Flange material: Aluminum Shaft length: 12 mm Reverse polarity protection: 1 Storage temperature range: -40 °C ... +100 °C, without package Resolution: 14 bit x 12 bit Parameterising data: Abtastrate für Geschwindigkeitsberechnung, Number of revolutions, Einheit für Ausgabe des Geschwindigkeitswerts, Elektronische Nocken (2 Kan
Specification: Part Number AHM36A-SCCC014x12 Permissible Load capacity of shaft: 20 N (axial), 40 N (radial) Encoder profile: CANopen CiA DS-301 V4.02, CiA DSP-305 LSS, Encoder Profile: - CIA DS-406, V3.2. - Class C2 Max. number of revolutions: 4,096, number of revolutions from 1 to 4,096 programmable Operating voltage range: 10 V ... 30 V Initialization time: 2 s Bus termination: Via external termination resistance
Specification: Part Number 1066005 Moment of inertia of the rotor: 2.5 gcm² Shaft diameter: 6 mm Max. number of revolutions: 1 Initialization time: 2 s Permissible relative humidity: 90 % (Condensation not permitted) Bearing lifetime: 3.6 x 10^8 revolutions Operating torque: < 0.5 Ncm (+20 °C) Power consumption max. without load: 1.5 W Power consumption: Without load Error limits: ± 0.35 ° (at 2
Specification: Part Number 1034383 Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted Permissible Load capacity of shaft: 10 N (axial), 20 N (radial) Max. number of steps per revolution: 360 Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Moment of inertia of the rotor: 48 gcm² Working temperature range: -20 °C ... 85 °C Maximum operating speed: 10,000 /
Specification: Part Number 1031399 Bearing lifetime: 3.6 x 10^9 revolutions Max. number of revolutions: 1 Start up torque: 0.25 Ncm MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) Error limits: 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) Moment of inertia of the rotor: 48 gcm² Resolution power: 1,024 x 1 Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to
Specification: Part Number 1031428 Operating torque: 0.2 Ncm Max. angular acceleration: 500,000 rad/s² Initialization time: 80 ms MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) Repeat accuracy: 0.005 ° EMC: (according to EN 61000-6-2 and EN 61000-6-3) Start up torque: 0.25 Ncm Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) Bearing lifetime: 3.6
Specification: Part Number 1031453 Operating power consumption (no load): 60 mA Bearing lifetime: 3.6 x 10^9 revolutions Measuring step: 360 ° /number of lines Electrical interface: Connector M23, 12-pin, radial Working temperature range: -20 °C ... 85 °C Repeat accuracy: 0.005 ° Error limits: 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) Enclosure rating: IP 65 (according to IEC
Specification: Part Number 1031483 MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) Bearing lifetime: 3.6 x 10^9 revolutions Working temperature range: -20 °C ... 85 °C Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Storage temperature range: -40 °C ... 100 °C Max. angular acceleration: 500,000 rad/s² Measuring step: 360 ° /number of lines Mechanical
Specification: Part Number 1035366 EMC: (according to EN 61000-6-2 and EN 61000-6-3) Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Resistance to shocks: 50 g (according to EN 60068-2-27) Permissible Load capacity of shaft: 10 N (axial), 20 N (radial) Operating power consumption (no load): 60 mA Max. angular acceleration: 500,000 rad/s² Max. number of revolutions: 1 W
Specification: Part Number 1031488 Mass: 0.3 kg Operating torque: 0.2 Ncm Storage temperature range: -40 °C ... 100 °C Start up torque: 0.25 Ncm MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) Permissible Load capacity of shaft: 10 N (axial), 20 N (radial) Shaft diameter: 6 mm Electrical interface: Connector M23, 12-pin, radial Resistance to shocks: 50 g (according to EN 60068-2-27) Wor
Specification: Part Number 1031503 Error limits: 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) Operating torque: 0.2 Ncm Working temperature range: -20 °C ... 85 °C Shaft diameter: 6 mm Storage temperature range: -40 °C ... 100 °C Resolution power: 32,768 x 1 Bearing lifetime: 3.6 x 10^9 revolutions Mechanical interface: Solid shaft, Servo flange Max. number of revolutions: 1
Specification: Part Number 1031400 Shaft diameter: 6 mm MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) Repeat accuracy: 0.005 ° Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Measuring step: 360 ° /number of lines Electrical interface: Connector M23, 12-pin, axial Measuring step deviation: 0.005 °, 0.016 ° Error limits: 0.035 ° (binary number of st
Specification: Part Number 1031429 Storage temperature range: -40 °C ... 100 °C Start up torque: 0.25 Ncm Operating torque: 0.2 Ncm Error limits: 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) Max. number of revolutions: 1 Measuring step deviation: 0.005 °, 0.016 ° Operating power consumption (no load): 60 mA Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (wi
Specification: Part Number 1031806 Bearing lifetime: 3.6 x 10^9 revolutions Mechanical interface: Solid shaft, Servo flange Moment of inertia of the rotor: 48 gcm² Repeat accuracy: 0.005 ° Operating power consumption (no load): 60 mA Working temperature range: -20 °C ... 85 °C Initialization time: 80 ms Operation of zero-set: ≥ 100 ms Measuring step: 360 ° /number of lines Storage temperature
Specification: Part Number 1031504 Moment of inertia of the rotor: 48 gcm² Electrical interface: Cable, 11-pin, radial, 1.5 m Max. number of revolutions: 1 Operation of zero-set: ≥ 100 ms Operating voltage range: 10 V DC ... 32 V DC Operating torque: 0.2 Ncm Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Operating power consumption (no load): 60 mA Measuring step deviatio
Specification: Part Number 1031401 Initialization time: 80 ms EMC: (according to EN 61000-6-2 and EN 61000-6-3) Measuring step: 360 ° /number of lines Operating power consumption (no load): 60 mA Operating torque: 0.2 Ncm Permissible Load capacity of shaft: 10 N (axial), 20 N (radial) Electrical interface: Cable, 11-pin, radial, 3 m Working temperature range: -20 °C ... 85 °C MTTFd: mean time to danger
Specification: Part Number 1032591 Max. number of steps per revolution: 32,767 Max. number of revolutions: 1 Mechanical interface: Solid shaft, Servo flange Measuring step: 360 ° /number of lines Storage temperature range: -40 °C ... 100 °C Error limits: 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) Measuring step deviation: 0.005 °, 0.016 ° Operating voltage range: 10 V DC ... 3
Specification: Part Number 1031456 Mechanical interface: Solid shaft, Servo flange Enclosure rating: IP 66 (according to IEC 60529) Operating voltage range: 10 V DC ... 32 V DC Operation of zero-set: ≥ 100 ms Start up torque: 0.25 Ncm Moment of inertia of the rotor: 48 gcm² Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Permissible relative humidity: 90 % (condensation of th
Specification: Part Number 1031804 Operation of zero-set: ≥ 100 ms Operating voltage range: 10 V DC ... 32 V DC Start up torque: 0.25 Ncm Bearing lifetime: 3.6 x 10^9 revolutions Error limits: 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) EMC: (according to EN 61000-6-2 and EN 61000-6-3) Working temperat
Specification: Part Number 1031509 Operating power consumption (no load): 60 mA MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) Resistance to shocks: 50 g (according to EN 60068-2-27) Shaft diameter: 6 mm Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Resolution power: 32,768 x 1 Bearing lifetime: 3.6 x 10^9 revolutions Measuring step: 360 ° /number of lines Op
Specification: Part Number 1031489 Max. number of revolutions: 1 Start up torque: 0.25 Ncm Permissible Load capacity of shaft: 10 N (axial), 20 N (radial) Moment of inertia of the rotor: 48 gcm² Initialization time: 80 ms Operating power consumption (no load): 60 mA Electrical interface: Cable, 11-pin, axial, 1.5 m Max. number of steps per revolution: 32,767 Maximum operating speed: 10,000 /min (without
Specification: Part Number 1031506 Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Start up torque: 0.25 Ncm Operating torque: 0.2 Ncm Operating voltage range: 10 V DC ... 32 V DC Enclosure rating: IP 66 (according to IEC 60529) Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) EMC: (according to EN 61000-6-2 and EN 61000-6-3) Working tempera
Specification: Part Number 1031388 Operating power consumption (no load): 60 mA Max. number of revolutions: 1 Shaft diameter: 10 mm Mechanical interface: Solid shaft, Face mount flange Resistance to shocks: 50 g (according to EN 60068-2-27) Operation of zero-set: ≥ 100 ms Max. angular acceleration: 500,000 rad/s² Repeat accuracy: 0.005 ° Permissible Load capacity of shaft: 20 N (radial) 10 N (axial)
Specification: Part Number 1031394 EMC: According to EN 61000-6-2 and EN 61000-6-3 Start up torque: 0.4 Ncm Operating voltage range: 10 V DC ... 32 V DC Storage temperature range: -40 °C ... 100 °C Permissible Load capacity of shaft: 20 N (radial) 10 N (axial) Operation of zero-set: ≥ 100 ms Mechanical interface: Solid shaft, Face mount flange Resolution power: 512 x 1 Mass: 0.3 kg Resistance to
