AHM36A-S1PC014x12

Specification: Part Number 1066009 Resolution: 14 bit x 12 bit Mass: 0.12 kg (for an encoder with connector outlet) Reverse polarity protection: 1 Operating torque: < 1 Ncm (+20 °C) Start up torque: 1 Ncm (+20 °C) Housing material: Zinc EMC: (according to EN 61000-6-2 and EN 61000-6-3) CW/CCW (counting sequence when turning): L-active (L = 0 - 1 V, H = 2,0 - Us V) Moment of inertia of the rotor: 2.5 gcm² Shaft diameter: 6 mm Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Max. angular acceleration: 500,000 rad/s² Enclosure rating: IP 66 / IP 67 (according to IEC 60529), housing side, IP 66 / IP 67 (according to IEC 60529), shaft side Bearing lifetime: 3.6 x 10^8 revolutions Power consumption: Without load Electrical interface: SSI Code sequence: CW/CCW Max. number of revolutions: 4,096, number of revolutions from 1 to 4,096 programmable Mechanical interface: Solid shaft, Servo flange Shaft length: 12 mm Interface signals: Clock +, Clock -, Data +, Data- Repeat accuracy: ± 0.2 ° (at 20°C) Error limits: ± 0.35 ° (at 20°C) Permissible relative humidity: 90 % (Condensation not permitted) SET (electronic adjustment): H-active L = 0 - 3 V, H = 4.0 - Us V Measuring step: ± 0.022 ° (360 ° / number of steps) Permissible Load capacity of shaft: 20 N (axial), 40 N (radial) Operating voltage range: 4.5 V DC ... 32 V DC MTTFd: mean time to dangerous failure: 230 a (EN ISO 13849-1) Resolution power: 16,384 x 4,096 Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Parameterising data: Number of revolutions (only Multiturn version), Code type, Position Errorbit, PRESET, Endless operating functionality (only Multiturn version), Number of steps per revolution, SSI mode, Verschiebung Positionsbits, Zählrichtung Code type: Binary, Gray Shaft material: Stainless steel Working temperature range: -40 °C ... +100 °C Flange material: Aluminum Initialization time: 100 ms Storage temperature range: -40 °C ... +100 °C, without package Clock frequency: 2 MHz Connection type: Male connector M12, 8-pin, universal Power consumption max. without load: 1.5 W Maximum operating speed: 6,000 /min Max. number of steps per revolution: 16,384, number of steps from 1 to 16,384 programmable