Specification: Part Number 1032901 Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection SET (electronic adjustment): Via PRESET push button or protocol Flange material: Aluminum Mechanical interface: Through hollow shaft MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Electrical interface: Bus adaptor with 3 cable screw fixings Max. angular acceleration: 600,000 rad/s²
Specification: Part Number 1032665 Shaft material: Stainless steel Resolution: 12 bit x 12 bit Storage temperature range: -40 °C ... 125 °C, without package Flange material: Aluminum Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection Max. number of steps per revolution: 4,096 Operating torque: 0.4 Ncm Bus interface: RS-485 EMC: (according to EN 61000-6-2 and EN 61000-6-3)
Specification: Part Number 1032659 Electrical interface: Bus adaptor with 3 cable screw fixings Working temperature range: -20 °C ... 80 °C EMC: (according to EN 61000-6-2 and EN 61000-6-3) Start up torque: 0.5 Ncm Error limits: ± 0.25 ° Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Address setting: 0 ... 127, DIP-switches or protocol Moment of inertia of the rotor: 153 gcm² Max. nu
Specification: Part Number 1030047 Data protocol: Profile for encoders (07hex) - Class 2 MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Max. number of revolutions: 8,192 Bus interface: RS-485 Measuring step: 0.043 ° Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection Repeat accuracy: 0.1 ° Moment of inertia of the rotor: 153 gcm² Housing material: Die-cast a
Specification: Part Number 1053334 Repeat accuracy: ± 0.15 ° (at room temperature) Storage temperature range: -40 °C ... +100 °C Permissible relative humidity: 95 % (Condensation not permitted) Shaft diameter: 3/8" Bus termination: DIP switch Flange material: Aluminum Bearing lifetime: 3.0 x 10^9 revolutions Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Resistance to shocks: 100 g, 6
Specification: Part Number 1053331 Operating torque: 1.6 Ncm (+20 °C) Mechanical interface: Blind hollow shaft Max. angular acceleration: 500,000 rad/s² Enclosure rating: IP 67 (according to IEC 60529), housing, IP 67 (according to IEC 60529), Shaft Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Bearing lifetime: 3.0 x 10^9 revolutions Resolution: 14 bit x 17 bit Reverse polarity protection:
Specification: Part Number 1053335 Max. number of revolutions: 131,072, programmable Resolution power: 16,384 x 131,072 Operating voltage range: 10 V ... 32 V Enclosure rating: IP 67 (according to IEC 60529), housing, IP 67 (according to IEC 60529), Shaft Initialization time: Ca. 1 s Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Error limits: ± 0.35 ° (at room temperature) Repeat accuracy:
Specification: Part Number 1053336 Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Start up torque: 2 Ncm (+20 °C) Resolution: 14 bit x 17 bit Shaft diameter: 14 mm Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Permissible relative humidity: 95 % (Condensation not permitted) Data protocol: PROFIBUS DP V0, PROFIBUS DP V1 + V2 Enclosure rating: IP 67 (according t
Specification: Part Number 1053328 Bus: PROFIBUS DP Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Shaft material: Stainless steel Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Bearing lifetime: 3.0 x 10^9 revolutions Data protocol: PROFIBUS DP V0, PROFIBUS DP V1 + V2 Reverse polarity protection:
Specification: Part Number 1051867 Mass: 0.2 kg Code sequence: CW/CCW, parameter adjustable MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Mechanical interface: Blind hollow shaft Max. angular acceleration: 500,000 rad/s² Code type: Gray Reverse polarity protection: 1 Max. number of revolutions: 4,096 CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - U
Specification: Part Number 1064851 RPI (requested packet interval): 5 ms ... 750 ms Max. number of steps per revolution: 262,144 Max. number of revolutions: 4,096 Working temperature range: -30 °C ... 85 °C Repeat accuracy: 0.002 ° Start up torque: 0.8 Ncm (20 °C) Mass: 0.2 kg Initialization time: Ca. 12 s Power consumption max.: 3 W Measuring step deviation: ± 0.002 ° Storage temperature rang
Specification: Part Number 1054224 Resolution power: 262,144 x 4,096 Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.05 mm Code type: Gray Working temperature range: -30 °C ... 100 °C Start up torque: 0.8 Ncm (20 °C) Max. number of revolutions: 4,096 Reverse polarity protection: 1 Mechanical interface: Blind hollow shaft Initialization time: 50 ms Resistance to vibration: 20 g, 10 Hz ..
Specification: Part Number 1059054 Resolution power: 262,144 x 4,096 Shaft material: Stainless steel Maximum operating speed: 6,000 /min Repeat accuracy: ≤ 0.002 ° EMC: (according to EN 61000-6-2 and EN 61000-6-3) Endless operating functionality: 1 Mass: 0.2 kg Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Encoder profile: CiA DS-406 Max. angular acceleration: 500
Specification: Part Number 1052851 Reference signal, position: 90 °, electronically, gated with A and B Maximum operating speed: 6,000 /min Resistance to shocks: 60 g (according to EN 60068-2-27) Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Interface signals: A, B: digital differential, Clock +, Clock -, Data +, Data- Max. number of steps per revolution:
Specification: Part Number 1066269 Operating voltage range: 4.5 V DC ... 32 V DC Measuring step: 0.014 ° 360 ° / number of steps Max. number of steps per revolution: 262,144 Shaft diameter: 15 mm Initialization time: 50 ms Resistance to shocks: 60 g (according to EN 60068-2-27) Clock frequency: 2 MHz Power consumption: 0.5 W (without load) CW/CCW (counting sequence when turning): L-active (L &;8801; 0
Specification: Part Number 1038904 Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.01 mm Shaft diameter: 15 mm EMC: (according to EN 61000-6-2 and EN 61000-6-3) Resistance to shocks: 60 g (according to EN 60068-2-27) Start up torque: 0.8 Ncm (20 °C) Moment of inertia of the rotor: 40 gcm² Clock frequency: 2 MHz Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.05 mm Power consumptio
Specification: Part Number 1052852 MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Max. angular acceleration: 500,000 rad/s² Operating torque: 0.6 Ncm (20 °C) Shaft diameter: 15 mm Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.01 mm Maximum output frequency: 820 kHz Resistance to shocks: 60 g (according to EN 60068-2-27) Mass: 0.2 kg Permissible relative humidity: 90 % (conden
Specification: Part Number 1037865 Shaft diameter: 6 mm Error limits: ± 0.03 ° EMC: (according to EN 61000-6-2 and EN 61000-6-3) Max. angular acceleration: 500,000 rad/s² Start up torque: 0.5 Ncm (+20 °C) Storage temperature range: -40 °C ... +100 °C, without package Initialization time: 50 ms Measuring step deviation: ± 0.008 ° Repeat accuracy: 0.002 ° Maximum operating speed: 9,000 /min
Specification: Part Number 1037872 Bearing lifetime: 3.0 x 10^9 revolutions Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Max. angular acceleration: 500,000 rad/s² Moment of inertia of the rotor: 6.2 gcm² Working temperature range: -30 °C ... +100 °C Max. number of steps per revolution: 4,096 Initialization time: 50 ms Permissible Load capacity of shaft: 40 N (ax
Specification: Part Number 1037866 CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) EMC: (according to EN 61000-6-2 and EN 61000-6-3) Resolution: 13 bit x 12 bit Moment of inertia of the rotor: 6.2 gcm² Electrical interface: SSI/Gray Operating voltage range: 4.5 V DC ... 32 V DC Measuring step: 0.014 ° 360 ° / number of steps Bearing lifetime: 3.0 x 10^9 revolut
Specification: Part Number 1037666 Mass: 0.26 kg Max. number of steps per revolution: 262,144 Bearing lifetime: 3.0 x 10^9 revolutions Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Electrical interface: SSI/Gray Start up torque: 0.5 Ncm (+20 °C) Initialization time: 50 ms Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Error limit
Specification: Part Number 1037873 Working temperature range: -30 °C ... +100 °C EMC: (according to EN 61000-6-2 and EN 61000-6-3) Operating torque: 0.3 Ncm (+20 °C) Resolution: 12 bit x 12 bit Reverse polarity protection: 1 Interface signals: Clock +, Clock -, Data +, Data- Bearing lifetime: 3.0 x 10^9 revolutions Resolution power: 4,096 x 4,096 CW/CCW (counting sequence when turning): L-active (L &;8
Specification: Part Number 1037867 Working temperature range: -30 °C ... +100 °C EMC: (according to EN 61000-6-2 and EN 61000-6-3) SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Maximum operating speed: 9,000 /min Initialization time: 50 ms Resolution power: 8,192 x 4,096 Code type: Gray Measuring step: 0.014 ° 360 ° / number of steps MTTFd: mean time to dangerous f
Specification: Part Number 1037440 Resolution power: 262,144 x 4,096 Interface signals: Clock +, Clock -, Data +, Data- Resolution: 18 bit x 12 bit Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Clock frequency: 2 MHz Power consumption: 0.5 W (without load) Reverse polarity protection: 1 Connection type: Cable, 8-wire, universal, 1.5 m Maximum operating speed: 9,000 /min Storage temper
Specification: Part Number 1037668 Repeat accuracy: 0.002 ° Reverse polarity protection: 1 Maximum operating speed: 9,000 /min Interface signals: Clock +, Clock -, Data +, Data- Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Power consumption: 0.5 W (without load) Max. number of revolutions: 4,096 Resolution: 18 bit x 12 bit Start up torque: 0.5 Ncm (+20 °C) CW/CCW (counting sequence w
Specification: Part Number 1037521 Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Storage temperature range: -40 °C ... +100 °C, without package Max. number of steps per revolution: 262,144 Connection type: Cable, 8-wire, universal, 3 m CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Start up torque: 0.5 Ncm (+20 °C) Max. angular accel
