AFM60A-BESA262144

Specification: Part Number 1054224 Resolution power: 262,144 x 4,096 Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.05 mm Code type: Gray Working temperature range: -30 °C ... 100 °C Start up torque: 0.8 Ncm (20 °C) Max. number of revolutions: 4,096 Reverse polarity protection: 1 Mechanical interface: Blind hollow shaft Initialization time: 50 ms Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Type of mounting shaft: Blind hollow shaft Signal before differential generation: ± 20 % Power consumption: 0.5 W (without load) Storage temperature range: -40 °C ... 100 °C, without package Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Moment of inertia of the rotor: 40 gcm² Error limits: ± 0.03 ° Signal offset: 2.5 V ± 10 % SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Electrical interface: SSI/Gray + Sin/Cos, 1.024 Perioden, programmable Repeat accuracy: 0.002 ° MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Bearing lifetime: 3.0 x 10^9 revolutions Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Measuring step deviation: ± 0.002 ° CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Code sequence: CW/CCW, parameter adjustable Mass: 0.2 kg Resolution: 18 bit x 12 bit Max. number of steps per revolution: 262,144 Operating torque: 0.6 Ncm (20 °C) Maximum output frequency: 200 kHz Clock frequency: 2 MHz EMC: (according to EN 61000-6-2 and EN 61000-6-3) Interface signals: Clock +, Clock -, Data +, Data-, Sin +, Sin - , Cos + , Cos -: analog, differential Operating voltage range: 4.5 V DC ... 32 V DC Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.01 mm Shaft diameter: 12 mm Max. angular acceleration: 500,000 rad/s² Connection type: Connector M23, 12-pin, radial Maximum operating speed: 6,000 /min Load resistance min.: 120 &;937;