AFM60A-S1AC262144

Specification: Part Number 1037666 Mass: 0.26 kg Max. number of steps per revolution: 262,144 Bearing lifetime: 3.0 x 10^9 revolutions Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Electrical interface: SSI/Gray Start up torque: 0.5 Ncm (+20 °C) Initialization time: 50 ms Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Error limits: ± 0.03 ° MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Max. number of revolutions: 4,096 Reverse polarity protection: 1 Repeat accuracy: 0.002 ° Operating torque: 0.3 Ncm (+20 °C) Power consumption: 0.5 W (without load) Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Operating voltage range: 4.5 V DC ... 32 V DC Code sequence: CW/CCW, parameter adjustable EMC: (according to EN 61000-6-2 and EN 61000-6-3) Maximum operating speed: 9,000 /min CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Code type: Gray Resolution power: 262,144 x 4,096 Working temperature range: -30 °C ... +100 °C Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Storage temperature range: -40 °C ... +100 °C, without package Moment of inertia of the rotor: 6.2 gcm² SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Interface signals: Clock +, Clock -, Data +, Data- Measuring step deviation: ± 0.002 ° Connection type: Male connector M12, 8-pin, radial Shaft diameter: 6 mm Mechanical interface: Solid shaft, Servo flange Permissible Load capacity of shaft: 40 N (axial), 80 N (radial) Resolution: 18 bit x 12 bit Clock frequency: 2 MHz Max. angular acceleration: 500,000 rad/s² Measuring step: 0.014 ° 360 ° / number of steps