ATM60-AAL12X12

Specification: Part Number 1030011 Max. angular acceleration: 500,000 rad/s² Mass: 0.4 kg Initialization time: 1,050 ms Max. number of steps per revolution: 4,096 Power consumption max. without load: 0.8 W Working temperature range: -20 °C ... +85 °C Enclosure rating: IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 65 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal Housing material: Die-cast aluminum Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Measuring step: 0.043 ° Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Operating voltage range: 10 V ... 32 V Clock frequency: 1 MHz Resolution: 12 bit x 12 bit Interface signals: Clock +, Clock -, Data +, Data-, Programming interface: RS-422 Parameterising data: Number of revolutions, Code type, Electronic adjustment, Number of steps per revolution Connection type: Cable, 12-pin, radial, 3 m Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Max. number of revolutions: 4,096 Bearing lifetime: 3.6 x 10^9 revolutions MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Flange material: Aluminum Permissible relative humidity: 98 % SET (electronic adjustment): H-active (L &;8801; 0 - 4,7 V, H &;8801; 10 - Us V) Shaft material: Stainless steel EMC: (according to EN 61000-6-2 and EN 61000-6-3) Storage temperature range: -40 °C ... +100 °C, without package Resolution power: 4,096 x 4,096 Electrical interface: SSI Error limits: ± 0.25 ° Mechanical interface: Blind hollow shaft Shaft diameter: 6 mm, 1/4 " 8 mm, 3/8 " 10 mm, 1/2 " 12 mm 14 mm 15 mm Code type: Binary, Gray Repeat accuracy: 0.1 ° CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Start up torque with shaft seal: 1.2 Ncm Code sequence: CW/CCW Operating torque with shaft seal: 0.8 Ncm Moment of inertia of the rotor: 55 gcm²