ATM60-AAK12X12

Specification: Part Number 1030010 SET (electronic adjustment): H-active (L &;8801; 0 - 4,7 V, H &;8801; 10 - Us V) Code type: Binary, Gray Storage temperature range: -40 °C ... +100 °C, without package Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Error limits: ± 0.25 ° EMC: (according to EN 61000-6-2 and EN 61000-6-3) Start up torque with shaft seal: 1.2 Ncm Connection type: Cable, 12-pin, radial, 1.5 m Flange material: Aluminum Resolution power: 4,096 x 4,096 Operating voltage range: 10 V ... 32 V Housing material: Die-cast aluminum Initialization time: 1,050 ms Working temperature range: -20 °C ... +85 °C Interface signals: Clock +, Clock -, Data +, Data-, Programming interface: RS-422 Mechanical interface: Blind hollow shaft Code sequence: CW/CCW Permissible relative humidity: 98 % Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Moment of inertia of the rotor: 55 gcm² Max. angular acceleration: 500,000 rad/s² Repeat accuracy: 0.1 ° Clock frequency: 1 MHz Enclosure rating: IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 65 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal Mass: 0.4 kg Measuring step: 0.043 ° Shaft diameter: 6 mm, 1/4 " 8 mm, 3/8 " 10 mm, 1/2 " 12 mm 14 mm 15 mm Power consumption max. without load: 0.8 W Operating torque with shaft seal: 0.8 Ncm Max. number of revolutions: 4,096 Electrical interface: SSI Max. number of steps per revolution: 4,096 Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Parameterising data: Number of revolutions, Code type, Electronic adjustment, Number of steps per revolution Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Bearing lifetime: 3.6 x 10^9 revolutions Shaft material: Stainless steel Resolution: 12 bit x 12 bit