ATM60-C4H13X13

Specification: Part Number 1030024 Moment of inertia of the rotor: 35 gcm² Flange material: Aluminum Shaft diameter: 10 mm Max. number of steps per revolution: 8,192 Bus interface: ISO-DIS 11898 Bearing lifetime: 3.6 x 10^9 revolutions Bus: CANopen Electrical interface: Bus adaptor with cable screw fixings or connector Mass: 0.59 kg MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Shaft material: Stainless steel EMC: (according to EN 61000-6-2 and EN 61000-6-3) Mechanical interface: Solid shaft, Face mount flange Power consumption max.: 2 W SET (electronic adjustment): Via PRESET push button or protocol Resistance to shocks: 100 g (according to EN 60068-2-27) Operating torque without shaft seal: 0.3 Ncm Data protocol: Communication Profile DS 301 V4.0, Device Profile DSP 406 V 2.0 Status information: 2-colours LED for CAN controller status Start up torque with shaft seal: 2.5 Ncm Start up torque without shaft seal: 0.5 Ncm Error limits: ± 0.25 ° Max. number of revolutions: 8,192 Operating torque with shaft seal: 1.8 Ncm Bus termination: DIP switch Enclosure rating: IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 66 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal Working temperature range: -20 °C ... 85 °C Data transmission rate (baud rate): 1 MBaud, 125 kBaud, 20 kBaud, 250 kBaud, 50 kBaud, 500 kBaud, DIP-switches or protocol / 10 kBaud Initialization time: 1,250 ms Storage temperature range: -40 °C ... 125 °C, without package Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Resolution: 13 bit x 13 bit Max. angular acceleration: 500,000 rad/s² Repeat accuracy: 0.1 ° Housing material: Die-cast aluminum Address setting: 0 ... 63, DIP-switches or protocol Permissible relative humidity: 98 % Resolution power: 8,192 x 8,192 Permissible Load capacity of shaft: 300 N (radial), 50 N (axial) Operating voltage range: 10 V ... 32 V Measuring step: 0.043 °