ATM60-DAH13X13

Specification: Part Number 1030019 MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Data protocol: DeviceNet Specification Release 2.0 SET (electronic adjustment): Via PRESET push button or protocol Power consumption max.: 2 W Enclosure rating: IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 66 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal Storage temperature range: -40 °C ... 125 °C, without package Measuring step: 0.043 ° EMC: (according to EN 61000-6-2 and EN 61000-6-3) Shaft diameter: 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " Resolution power: 8,192 x 8,192 Bus interface: ISO-DIS 11898 Working temperature range: -20 °C ... 85 °C Status information: Network status LED, 2-colours Resistance to shocks: 100 g (according to EN 60068-2-27) Data transmission rate (baud rate): 250 kBaud, 500 kBaud, DIP-switches or protocol / 125 kBaud Bearing lifetime: 3.6 x 10^9 revolutions Housing material: Die-cast aluminum Mass: 0.59 kg Error limits: ± 0.25 ° Electrical interface: Bus adaptor with cable screw fixings or connector Resolution: 13 bit x 13 bit Operating torque with shaft seal: 0.8 Ncm Operating voltage range: 10 V ... 32 V Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Permissible relative humidity: 98 % Address setting: 0 ... 63, DIP-switches or protocol Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Repeat accuracy: 0.1 ° Bus termination: DIP switch Shaft material: Stainless steel Mechanical interface: Blind hollow shaft Bus: DeviceNet Max. number of revolutions: 8,192 Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Flange material: Aluminum Moment of inertia of the rotor: 55 gcm² Initialization time: 1,250 ms Max. number of steps per revolution: 8,192 Max. angular acceleration: 500,000 rad/s² Start up torque with shaft seal: 1.2 Ncm