ATM60-D4H13X13

Specification: Part Number 1030017 Error limits: ± 0.25 ° Electrical interface: Bus adaptor with cable screw fixings or connector Moment of inertia of the rotor: 35 gcm² Bus interface: ISO-DIS 11898 Resolution power: 8,192 x 8,192 Permissible relative humidity: 98 % Data transmission rate (baud rate): 250 kBaud, 500 kBaud, DIP-switches or protocol / 125 kBaud Working temperature range: -20 °C ... 85 °C Permissible Load capacity of shaft: 300 N (radial), 50 N (axial) Operating torque without shaft seal: 0.3 Ncm Status information: Network status LED, 2-colours EMC: (according to EN 61000-6-2 and EN 61000-6-3) Bus termination: DIP switch MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Enclosure rating: IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 66 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal Max. angular acceleration: 500,000 rad/s² Operating torque with shaft seal: 1.8 Ncm Max. number of revolutions: 8,192 Address setting: 0 ... 63, DIP-switches or protocol Initialization time: 1,250 ms Start up torque without shaft seal: 0.5 Ncm Power consumption max.: 2 W Bus: DeviceNet Bearing lifetime: 3.6 x 10^9 revolutions Start up torque with shaft seal: 2.5 Ncm Repeat accuracy: 0.1 ° Flange material: Aluminum Mass: 0.59 kg Max. number of steps per revolution: 8,192 Shaft material: Stainless steel Resistance to shocks: 100 g (according to EN 60068-2-27) Shaft diameter: 10 mm Operating voltage range: 10 V ... 32 V Storage temperature range: -40 °C ... 125 °C, without package Resolution: 13 bit x 13 bit SET (electronic adjustment): Via PRESET push button or protocol Housing material: Die-cast aluminum Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Measuring step: 0.043 ° Data protocol: DeviceNet Specification Release 2.0 Mechanical interface: Solid shaft, Face mount flange