ATM60-PAH13X13

Specification: Part Number 1030015 Status information: LED green (operation), LED red ( bus activity) Max. number of steps per revolution: 8,192 Shaft material: Stainless steel Max. angular acceleration: 500,000 rad/s² Initialization time: 1,250 ms Moment of inertia of the rotor: 55 gcm² Resistance to shocks: 100 g (according to EN 60068-2-27) Housing material: Die-cast aluminum Bearing lifetime: 3.6 x 10^9 revolutions Enclosure rating: IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 66 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal SET (electronic adjustment): Via PRESET push button or protocol Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Error limits: ± 0.25 ° Operating voltage range: 10 V ... 32 V Data protocol: Profile for encoders (07hex) - Class 2 Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Mass: 0.59 kg Operating torque with shaft seal: 0.8 Ncm Measuring step: 0.043 ° Permissible relative humidity: 98 % Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Electrical interface: Bus adaptor with cable screw fixings or connector Resolution: 13 bit x 13 bit Shaft diameter: 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " EMC: (according to EN 61000-6-2 and EN 61000-6-3) Flange material: Aluminum Mechanical interface: Blind hollow shaft Storage temperature range: -40 °C ... 125 °C, without package Start up torque with shaft seal: 1.2 Ncm Working temperature range: -20 °C ... 85 °C Max. number of revolutions: 8,192 Bus termination: DIP switch Address setting: 0 ... 127, DIP-switches or protocol Repeat accuracy: 0.1 ° Bus interface: RS-485 Resolution power: 8,192 x 8,192 Bus: PROFIBUS DP Power consumption max.: 2 W