ATM60-P4H13X13

Specification: Part Number 1030013 MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Error limits: ± 0.25 ° Bus interface: RS-485 Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Working temperature range: -20 °C ... 85 °C Enclosure rating: IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 66 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal Permissible Load capacity of shaft: 300 N (radial), 50 N (axial) Operating torque with shaft seal: 1.8 Ncm Moment of inertia of the rotor: 35 gcm² Mass: 0.59 kg Storage temperature range: -40 °C ... 125 °C, without package Permissible relative humidity: 98 % Resolution power: 8,192 x 8,192 Operating voltage range: 10 V ... 32 V Electrical interface: Bus adaptor with cable screw fixings or connector Flange material: Aluminum Start up torque without shaft seal: 0.5 Ncm Measuring step: 0.043 ° Max. number of revolutions: 8,192 Bearing lifetime: 3.6 x 10^9 revolutions Housing material: Die-cast aluminum Operating torque without shaft seal: 0.3 Ncm Repeat accuracy: 0.1 ° Bus: PROFIBUS DP Max. angular acceleration: 500,000 rad/s² Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection Max. number of steps per revolution: 8,192 Power consumption max.: 2 W Data protocol: Profile for encoders (07hex) - Class 2 Status information: LED green (operation), LED red ( bus activity) Resistance to shocks: 100 g (according to EN 60068-2-27) Shaft material: Stainless steel EMC: (according to EN 61000-6-2 and EN 61000-6-3) Resolution: 13 bit x 13 bit Shaft diameter: 10 mm Address setting: 0 ... 127, DIP-switches or protocol Bus termination: DIP switch SET (electronic adjustment): Via PRESET push button or protocol Mechanical interface: Solid shaft, Face mount flange Start up torque with shaft seal: 2.5 Ncm Initialization time: 1,250 ms